Loren has the samples of elements that are listed below at room temperature. He exposes the samples to the same heat source until each sample reaches a temperature of 90.0°C. 10 g of Al(s) (C subscript p. = 0.897 J/(gi°C)) 10 g of Ag(s) (C subscript p.= 0.234 J/gi°C ) 10 g of Fe(s) (C subscript p. = 0.450 J/gi°C) 10 g of Zn(s) (C subscript p. = 0.387 J/gi°C ) From first to last, which lists the order in which these samples will reach 90.0°C? Al, Fe, Zn, Ag Ag, Zn, Fe, Al Al, Fe, Ag, Zn Ag, Al, Zn, Fe
The order in which the substances will reach 90.0°C is; Ag, Zn, Fe, Al.
What is specific heat capacity?The term specific heat capacity refers to the quantity of heat that is required to raise the temperature of an object by 1K. The higher the heat capacity, the greater the heat that is required for the object to reach 90.0°C.
The order in which the substances will reach 90.0°C is; Ag, Zn, Fe, Al. We can see that Ag has the lowest heat capacity and the first to reach 90° while All has the highest heat capacity and the last to reach 90°.
Learn more about heat capacity:https://brainly.com/question/13499849
#SPJ2
Write the complete electron configurations for
(i) copper
(ii) xenon
Answer:
hello to get it from you and your favouri love your pic
when u get ur answer what type of reaction is it?
-double replacement
-combustion
-synthesis
-decomposition
-single replacement
Answer: combustion reaction
[tex]C_{25}H_{52}+38O_2\rightarrow 25CO_2+26H_2O[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side.
The balanced chemical equation is:
[tex]C_{25}H_{52}+38O_2\rightarrow 25CO_2+26H_2O[/tex]
The given reaction is a combustion reaction as in a combustion reaction , a susstaance is oxidized in the presence of oxygen to give carbon dioxide and water.
Write the formulas for the following ionic compounds.
potassium iodide
magnesium phosphide
silver sulphide
iron(III) bromide
magnesium hydroxide
sodium sulphate
lead (IV) nitrate
ammonium carbonate
Answer:
1) KI
2) Mg3P2
3) Ag2S
4) FeBr3
5) Mg(OH)2
6) Na2SO4
7) Pb(NO3)4
8) (NH4)2CO3
I have an irregular object that I want to find the density of. I put it in a graduated cylinder and the water rises by 12 mL. I put the object on a scale and it measures 42 g. What is the density of the object?
Answer:
12
Explanation:
during the combustion of methane (CH4), one mole of methane gas combines with two moles of oxygen gas (O2) to produce one mole of carbon dioxide gas (CO2) and two moles of water vapor. Which of the following chemical equations correctly represents the combustion of methane described above?
a)CH4(g) + 2O(g) ↔ CO2(g) + 2H2O(g)
b)CH4(g) + 2O(g) ↔ CO(g) + 2H2O(l)
c)CH4(g) + 2O2(g) ↔ CO2(g) + 2H2O(g)
d)CH4(g) + 2O2(g) ↔ CO(g) + 2H2O(l)
Answer:
a) cH4(g) +2O(g)__ CO2(g) +2H2O(g)
I hope this help
The force resulting from oppositely charged poles is ...
Fill in the blanks and name the process.
What is the process of ____ reproduction where a cell makes ___ of itself?
How many moles of oxygen are required to use up 2 moles of propane?
Answer:
6.0 moles
Explanation:
The thing to remember about balanced chemical equations is that the stoichiometric coefficients added to each chemical species that takes part in the reaction are equivalent to moles.
I think its 10 moles, hope this helps.
A chemist found a 60.00 gram sample containing copper and oxygen. Given the following percent composition, what is the mass of copper in the sample?
Copper- 57.08 %
Oxygen- 42.9296
choose an answer:
O 0.5708 g Cu
o 25.02 g Cu
34.25 g cu
63.5 g Cu
What makes up soil and where do these main components come
from? ASAP
Answer:
Soil is a mixture of minerals, dead and living organisms (organic materials), air, and water.
Explanation:
Dead organisms decompose(kind of like fertilizer)
water comes from nearby watersheds, precipitation processes, etc.
Answer:
Soil is made up of three main components – minerals that come from rocks below or nearby, organic matter which is the remains of plants and animals that use the soil, and the living organisms that reside in the soil. The proportion of each of these is important in determining the type of soil that is present.
which particle has the least mass
a. electron
b. proton
c. neutron
d. all have the same mass
Answer:
b. proton
Explanation:
The mass of an electron is only about 1/2000 the mass of a proton or neutron, so electrons contribute virtually nothing to the total mass of an atom. Electrons have an electric charge of −1, which is equal but opposite to the charge of a proton, which is +1.
Describe the relationship between thermal energy and temperature of a substance.
help me pls :D
The change in mass during a nuclear reaction is given
by which equation?
Select one:
A
B
C
D
Answer:c
Explanation:
c
For each of the following solutions, state whether the solution is saturated, unsaturated or supersaturated in the following conditions:
A) at 30o C, 70 g of KNO3 is dissolved in 100 g of water ________________________________
B) at 20 oC 0 g of KClO3 is dissolved in 100 g water________________________________
C) at 100 oC , 30 g of NaNO3 is dissolved in 100 g of water_____________________________
D) 50 g of NH4Cl at 70o C is dissolved in 100 g water. ________________________________
Answer:
C.at 100•C.30 g of NaNO3 is dissolved in 100 g of water
Question 10 (4 points)
A 3.4 L balloon is let go near the surface of the Earth where the pressure is about 1.15 atm. As the balloon floats up to the top of the
atmosphere where the pressure is only about 0.35 atm it expands. What is the volume of the balloon at the top of the atmosphere?
Does the Sun or the Moon have a greater influence on the high and
low tides of Earth's bceans? Why?
Explanation: Because ocean tides are the effect of ocean water responding to a gravitational gradient, the moon plays a larger role in creating tides than does the sun. But the sun's gravitational gradient across the earth is significant and it does contribute to tides as well.
what dose the atomic number of an element represent
Answer:
No. of electrons of the element
PLEASEEEE HELP URGENTTTT
Answer:
i don't see the question
Explanation:
1. if 100 ML of a 12.0 M HCL solution is diluted to 2.00 L, what is the molarity of the final solution?
10. The electronic configuration of two elements X and Y are given below:
Зр
An
8p
compound.
Answer:
Pppppppp pppppppp pppppppp pppppppp
What do you already know about the structure of a water molecule?
Answer:
The key to understanding water's chemical behavior is its molecular structure. A water molecule consists of two hydrogen atoms bonded to an oxygen atom, and its overall structure is bent. This is because the oxygen atom, in addition to forming bonds with the hydrogen atoms, also carries two pairs of unshared electrons
Explanation:
Hope it helps
gallium (III) carbonate formula
Grams to Grams
1N2 + 3H2 -->2NH3
If you produced 34.06g of NH3 assuming excess N2 how many grams of H2 was used?
Answer:
grams H₂(g) = 6.11 grams H₂(g) used
Explanation:
Convert all given values to moles (if not already in moles), solve by rxn ratios and then convert moles to needed dimensions.
N₂(g) + 3H₂(g) => 2NH₃(g)
excess ? 34.6g/17g/mole = 2.04 moles
moles of H₂(g) needed = 3/2(2.04)moles = 3.05 moles H₂(g)
grams H₂(g) = 3.05 moles x 2 grams/mole = 6.11 grams H₂(g)
Magnesium reacts with the oxygen in the air to form magnesium oxide. If 35 g of O2 was used in the reaction. How many Liters of O2 were present at 301K and a pressure of 1.35 atm?
Answer:
20.02 Liters
Explanation:
Mass = 35g
Volume = ?
Temperature = 301K
Pressure = 1.35 atm
The relationship between the quantities is given as;
PV = nRT
n = mass / Molar mass = 35 / 32 = 1.09375 mol
V = nRT / P
V = (1.09375 * 0.0821 * 301) / 1.35
V = 20.02 L
Why does air with higher amounts of water vapor have a lighter density?
Answer:
moist air is less dense than dry air because water has a lower molecular weight than nitrogen and oxygen
Answer:
Water vapor is a relatively light gas when compared to diatomic Oxygen and diatomic Nitrogen. Thus, when water vapor increases, the amount of Oxygen and Nitrogen decrease per unit volume and thus density decreases because mass is decreasing.
Different solutions of salt X are made up. What volume of: a) a 4 mol/dm³ solution contains 2 moles of X? b) a 6 mol/dm³ solution contains 0.03 moles of X?
Answer:
a. 0.5dm³
b. 5x10⁻³dm³
Explanation:
a. A solution that is 4mol/dm³ contains 4 moles in 1dm³. The volume that contains 2 moles is:
2 moles * (1dm³ / 4mol) =
0.5dm³b. And for the 6 mol/dm³ containing 0.03moles:
0.03 moles * (1dm³ / 6mol) =
5x10⁻³dm³what is the electronic configuration of the atom x
Answer: K L M. 2 8 6.
Explanation:
HELP FAST!!!
Compared with intelligence sailors, space operations specialists are which of the following?
more involved in tracking targets
more involved in aligning communications systems
more involved in disseminating intelligence results
more involved in analyzing classified material
Answer:
the fourth one I think....m
Explanation:
tfffffdd
The answer is:
more involved in aligning communications systemsExplanation:
A space operations specialist tracks, monitors, and operates spacecraft and satellites. The specialist aligns ground, spacecraft, and satellite communications systems to provide accurate data. (I took the course, I know.)
If the energy of a photon of light is 3.37 x 10–19 J, what is the frequency of the light? A. 1.12 x 10–27 s –1 B. 8.90 x 1026 s –1 C. 5.09 x 1014 s –1 D. 6.70 x 10–44 s –1 E. 1.01 x 10–10 s –1
Answer:
The appropriate alternative is option C "[tex]5.09\times 10^{14} \ s[/tex]".
Explanation:
The given value is:
Energy of photon,
E = [tex]3.37\times 10^{-19} \ J[/tex]
As we know,
h = [tex]6.626\times 10^{-34} \ Js[/tex]
Now,
The frequency of the light will be:
⇒ [tex]E=hv[/tex]
On substituting the given values, we get
⇒ [tex]3.37\times 10^{-19}=6.626\times 10^{-34}\times v[/tex]
On solving, we get
⇒ [tex]v=5.09\times 10^{14} \ s[/tex]
If the energy of a photon of light is 3.37 x 10⁻¹⁹ J, then the frequency of the light is 5.09 x 10¹⁴ per sec.
How we calculate frequency?Frequency of light will be calculated by using the below formula:
E = hυ, where
E = energy of photon = 3.37 x 10⁻¹⁹ J
h = plank's constant = 6.626 × 10⁻³⁴ Js
Putting these values on the above equation and calculate for the frequency as:
υ = 3.37 x 10⁻¹⁹ J / 6.626 × 10⁻³⁴ Js = 5.09 x 10¹⁴ per sec
Hence, option (C) is correct i.e. 5.09 x 10¹⁴ per sec.
To know more about frequency, visit the below link:
https://brainly.com/question/254161