The code is given below. Engineers and scientists can use the programming environment MATLAB® to analyze, create, and test systems and technologies that will change the world.
The required details for MATLAB in given paragraph
The MATLAB language, a matrix-based language that enables the most natural expression of computer mathematics, is the core of MATLAB.
Here's one way to complete the task you described in MATLAB:
% Extract the first, second and third columns of the matrix s and store them in the variables s1, s2, and s3 respectively
s1 = s(:, 1);
s2 = s(:, 2);
s3 = s(:, 3);
% Compute the products r*s1, r*s2, r*s3 and store them in the variables c1, c2, c3 respectively
c1 = r .* s1;
c2 = r .* s2;
c3 = r .* s3;
% Build the matrix c with columns c1, c2 and c3
c = [c1 c2 c3];
The above code uses the colon operator (:) to extract the first, second, and third columns of the matrix s and store them in the variables s1, s2, and s3 respectively. Then it uses the element-wise multiplication operator (.) to compute the products rs1, rs2, rs3 and store them in the variables c1, c2, c3 respectively. Finally, it uses square bracket notation to concatenate the columns c1, c2, and c3 and store them in the matrix c.
To know more about matrix visit:
brainly.com/question/29273810
#SPJ4
construct a thesis statement that combines your event, the technology, the societal or cultural influences, and choice of general education interdisciplinary lens. your thesis statement should clearly and concisely state the relationships between your event, technology, societal or cultural differences, and lens. it acts as a hypothesis proposing how these elements will work together during your critical analysis.
Global trade has enhanced consumer trust and experience around the world, through integration of RFID technologies.
Radio-frequency identity (RFID) makes use of electromagnetic fields to routinely perceive and song tags attached to items. An RFID device consists of tiny radio transponder, radio receiver, and transmitter. even as precipitated via way of an electromagnetic interrogation pulse from close-by RFID reader tool,
the tag transmits digital facts, generally an identifying stock range, once more to the reader. This amount may be used to the tune stock items.
Passive tags are powered by power from RFID reader's interrogating radio waves. energetic tags are powered thru a battery and because of this, can be studied at a further range from the RFID reader, as an
awful lot as loads of meters.
Radio Frequency identity (RFID) is a generation that makes use of radio waves
to passively pick out a tagged object. it's far used in several industrial and industrial packages, from tracking gadgets alongside shipping chain to preserving the music of gadgets checked out of library.
To learn more about RFID visit here:
brainly.com/question/29538641
#SPJ4
you have implemented a network where hosts are assigned specific roles, such as for file sharing and printing. other host access those resources but do not host services of their own. what type of network do you have? a) extranet b) peer to peer c) intranet d) client/ server
You have set up a network where hosts are given particular responsibilities, including printing and file sharing. While not hosting their own services, other hosts can access such resources. Client/server networking is the type of network you have.
A network in information technology is described as a physical or wireless connection between at least two computer systems. A combination of two computers connected by a cable forms the simplest network. Peer-to-peer networks are this kind of network. Both participants in this network have equal privileges; there is no hierarchy. Each computer has access to the other's data and can share resources like storage space, software, or peripherals (printers, etc.).
Here you can learn more about network in the link brainly.com/question/15088389
#SPJ4
simulation, which is the use of probability and statistical computer models to better understand risk, falls under the category of analytics.
Simulation is a powerful tool used in analytics for modeling and understanding risk. It utilizes probability and statistical models to simulate various outcomes, and is used to predict future events.
Organizations can understand the possible risks connected with their decisions and activities by utilising simulation to mimic various situations, and then adapt their strategy as necessary. Additionally, simulation can be used to evaluate the effectiveness of current solutions and find prospective opportunities.
A wide range of outcomes, including but not limited to financial and economic models, marketing strategies, product designs, and organisational processes, can be modelled using simulation. Additionally, it is utilised to forecast the effects of possible changes and comprehend client behaviour. The impact of outside variables on a particular system, such as competition, technology, and legislation, can also be understood through simulation.
To know more about Simulation Please click on the given link:
https://brainly.com/question/16359096
#SPJ4
Wrap the remaining text content within an unordered list with seven list items. In the code, insert a blank line after the unordered list. This is the code what is the issue.
Web Design Resources
The code will be written in python language. This will contain all seven items on the list.
What is a code?In a certain programming language, a collection of commands or a collection of rules are referred to as computer code. It's also the name given to the source code just after the translator has prepared it for computer execution.
<html>
<body>
<p>Web Design Resources</p>
<!-- Unordered list-->
<ul>
<!-- Listings-->
<li><a href="https://www.w3.org" >W3C</a></li>
<li><a href="https://www.w3schools.com/" >W3 Schools</a></li>
<li><a href="https://www.html.com/">HTML</a></li>
<li><a href="https://www.smashingmagazine.com/">Smashing Magazine</a></li>
<li><a href="https://imagecompressor.com">Image Compressor</a></li>
<li><a href="https://validator.w3.org">HTML Validator</a></li>
<li><a href="https://emmet.io/">Emmet</a></li>
</ul>
<!-- One empty line-->
<br/>
</body>
</html>
Learn more about code, Here:
https://brainly.com/question/17204194
#SPJ1
You have placed a File Transfer Protocol (FTP) server in your DMZ behind your firewall. The FTP server is to be used to distribute software updates and demonstration versions of your products. However, users report that they are unable to access the FTP server.What should you do to enable access?answer choicesInstall a VPNDefine user accounts for all external visitorsMove the FTP outside of the firewall.Open ports 20 and 21 for inbound and outbound connections.
We need to open ports 20 and 21 in order to allow incoming and outgoing FTP connections.
Option: Open ports 20 and 21 for inbound and outbound connections.Enabling Access to FTP ServerIn order to enable access to our FTP server, we need to open ports 20 and 21 for inbound and outbound connections. By doing this, we will allow external users to connect to our FTP server in order to download software updates, demonstration versions of our products, and any other data that is stored on the server. Additionally, this will also allow users to upload files to the server, such as feedback or bug reports. Opening these ports will ensure that access to the FTP server is secure and reliable.
Learn more about FTP server: https://brainly.com/question/26103753
#SPJ4
what do you see are the challenge ahead for HCI at scale?
Answer:
Introduction.
Human-technology symbiosis.
Human-environment interactions.
Ethics, privacy and security.
Well-being, health and eudaimonia.
Accessibility and universal access.
Learning and creativity.
Social organization and democracy.
You have implemented a network where each device provides all other devices on the network with access to shared files.
What type of network do you have?
Peer-to-peer
Polling
Client-server
Multiple access
You have implemented a multiple access network, which allows each device to connect to and share files with all other devices on the network. This type of network does not require a central server, allowing for a more distributed and efficient system.
A multiple access network is a type of network where each device can connect to and share files with all other devices on the network. This type of network does not require a central server, allowing for a more distributed and efficient system. This type of network is often used in home and small business networks, where a central server is not available. The advantage of this type of network is that it is cost-effective, since no additional hardware is needed. Additionally, it is easy to set up and maintain, since all devices are connected to each other and can share files without the need for a server. Finally, it is also secure, since all devices on the network must be authenticated before they can access files.
Learn more about network here:
brainly.com/question/29970297
#SPJ4
looking at the upper right hand menu in the vitalsource e-text from left to right, which menu item is missing from the following list: search across book, reader preferences, , more options
The menu item missing from the list is "Table of Contents". This menu item allows users to navigate to different parts of the book quickly.
Finding the Missing Menu Item in the Vitalsource E-TextThe menu item missing from the list is "Table of Contents". This menu item allows users to quickly navigate to different parts of the e-text, such as chapters and sections. It also provides an overview of the entire book, so users can easily find topics that interest them. In addition, the Table of Contents can provide helpful hints about the structure of the book and the content, allowing users to better understand the material.
Learn more about table of contents: https://brainly.com/question/22928306
#SPJ4
that have no moving parts and are less likely to be damaged by dirt and impact, but still be cared for. stored in their cases when not in a digital camera. used to store dvd backup discs to protect from scratches and dirt. store this in a dry area; humidity can cause it to stick and then jam during printing. cleaning product specifically meant for computer screens.
IMAP allows users to view emails straight from the server. The email isn't actually downloaded or saved to their local device. Because of this, the email is not associated with any particular device.
Which is not a peripheral device you can connect using a USB port?That, while being maintained, don't have any moving components, are less susceptible to mud and impact damage. while not in a digital camera, they are kept in their cases. utilised to keep DVD backup discs clean and scratch-free when storing them. It should be kept dry to avoid sticking and jamming during printing due to humidity. pc screen cleaning solution designed exclusively for computers.
For use with touch screens, a stylus is a pen-shaped device. Stylus pens are more refined, thinner alternatives to fingers that are typically designed with conductive rubber or capacitive hard plastic tips. In order to prevent unauthorised data transfers, firewalls check the data that is sent between a computer and external recipients. Any additional device that the computer uses for input and output is referred to as a computer peripheral.
To learn more about claening refer to :
https://brainly.com/question/15080618
#SPJ4
In addition to a processor in memory a personal computer must have at least one input device one storage device and one__ device
Answer:
output
Explanation:
balance 2 was affected most by systemic error - error that has a very specific cause or pattern. what was the consistent difference between the actual mass and the measured mass? enter your answer to two decimal places. (example: 8.37).
Balance 2 was most affected by systemic error mistake, which has a very specific source or pattern. What was the persistent change. The current problem has been solved.
What are errors and what kinds of errors are there?Errors are the difference between the measurement that was actually made and what was actually measured. We show our accuracy by writing our measurement with an uncertainty. The three different types of errors are systematic, random, and human.
What constitutes a systematic error, specifically?A error is considered systematic if it consistently moves in the same direction. For instance, if anything consistently or regularly raised the blood pressure shortly before the measurements were to be taken, this can happen when taking blood pressure.
To know more about systemic error visit:-
https://brainly.com/question/13571447
#SPJ4
Given a string on one line and a second string on the second line, output the index where the second string starts in the first string Ex: If the input is: Fuzzy bear zy the output is: 3 Note: Using a pre-defined string function, the solution can be just one line of code. 1 #include 2 #include 3 using namespace std; 5 int main() { 6 string strVar; 7 string subString; 8 9 getline(cin, strVar); 10 cin >> subString; 11 12 return 0; 13 }
You can use the find() function from the C++ string library to find the starting index of a substring within a string. The string library in C++ provides several useful functions for manipulating strings.
Coding part of the given problem in C++:
#include <iostream>
#include <string>
using namespace std;
int main() {
string strVar;
string subString;
getline(cin, strVar);
cin >> subString;
int index = strVar.find(subString);
cout << index << endl;
return 0;
}
This will output the index where the second string starts in the first string. If the substring is not found, it will return string::npos.
To learn more about C++ string library, visit: https://brainly.com/question/23693327
#SPJ4
fill in the blank: in rstudio, the ___ is where you can find all the data you currently have loaded, and can easily organize and save it.
The Environment tab is where you can find all the data you currently have loaded, and can easily organize and save it.
What is Environment tab?The Environment tab is a feature of many computer programs and operating systems. It is a section of the user interface which allows users to configure the environment they work in. This can include customizing the desktop background, setting up the wallpaper, changing the mouse and keyboard settings, and configuring the display settings. It also includes other options such as language, fonts, and time zone settings. It is also possible to customize the start menu, taskbar, and system tray. The Environment tab is a great way for users to personalize their computing experience and make it more comfortable and efficient.
To learn more about time zone
https://brainly.com/question/15382944
#SPJ4
Write a program in python to calculate the cost for replacing the carpet for a room. Carpet is priced by square foot. Total cost of carpet replacement includes carpet, labor and sales tax. Dollar values are output with two decimals
The program in Phyton that calculates the cost for replacing the carpet for a room. Carpet is priced by square foot. Total cost of carpet replacement includes carpet, labor and sales tax, where dollar values are output with two decimals is given as follow:
carpet_price_per_sqft = float(input("Enter the price of the carpet per square foot: "))
room_length = float(input("Enter the length of the room: "))
room_width = float(input("Enter the width of the room: "))
labor_cost = float(input("Enter the labor cost: "))
sales_tax_rate = float(input("Enter the sales tax rate (as a decimal): "))
# Calculate the area of the room
room_area = room_length * room_width
# Calculate the cost of the carpet
carpet_cost = room_area * carpet_price_per_sqft
# Calculate the total cost, including labor and sales tax
total_cost = carpet_cost + labor_cost
sales_tax = total_cost * sales_tax_rate
total_cost += sales_tax
# Output the total cost with two decimal places
print("The total cost of replacing the carpet is ${:.2f}".format(total_cost))
See attached for run capture.
What is the explanation of the above program?This tool questions the user for the carpet price per square foot, room length and breadth, labor cost, and sales tax rate.
It then utilizes these data to compute the room's size, carpet cost, total cost including labor and sales tax, and finally outputs the entire cost to two decimal places using the format function.
Learn more about phyton:
https://brainly.com/question/16757242
#SPJ1
You should avoid renaming
Select one:
a.
most data files.
b.
executable files.
c.
files you've created.
d.
folders you've created.
Fill in the blank: A data analyst is working with the World Happiness data in Tableau. To get a better view of Moldova, they use the _____ tool.A. Radial
B. Pan
C. Lasso
D. Rectangular
The "Pan" tool is used to move the view of the data on the screen, rather than zooming in or out. This would allow the data analyst to navigate and explore the data for Moldova more easily.
Who is a Data Analayst?
A data analyst is a professional who is responsible for collecting, cleaning, analyzing, interpreting and visualizing data to extract valuable insights that can inform business decisions.
They use statistical, programming and data visualization tools to turn raw data into actionable information. They work with large data sets and use their analytical skills to identify patterns and trends that can help organizations make better decisions and improve their performance.
They may also use machine learning and artificial intelligence to build predictive models and forecast future trends.
To learn more about Data Analayst, visit: https://brainly.com/question/30023160
#SPJ4
his host supports intel vt-x, but intel vt-x is disabled. intel vt-x might be disabled if it has been disabled in the bios/firmware settings or the host has not been power-cycled since changing this setting. (1) verify that the bios/firmware settings enable intel vt-x and disable 'trusted execution.' (2) power-cycle the host if either of these bios/firmware settings have been changed. (3) power-cycle the host if you have not done so since installing vmware workstation. (4) update the host's bios/firmware to the latest version. vmware workstation does not support the user level monitor on this host. module 'monitormode' power on failed. failed to start the virtual machine.
The process of turning hardware off and back on is known as power cycling. Power cycling is used by technicians in the data center to test the durability and dependability of network components.
Which monitor mode is it?A computer equipped with a wireless network interface controller (WNIC) can monitor all traffic received on a wireless channel using monitor mode, also known as RFMON (Radio Frequency Monitor ). Your card can listen to all of the packets around us in Monitor mode. Our wireless device will only capture packets with our device's MAC address as the destination MAC when its mode is set to "Managed" by default.
On your Wi-Fi Card, there is no direct Windows command to check or activate monitor mode. As a result, we would need to use Microsoft Network Monitor. It is a Microsoft-approved tool that is currently in an archived state. However, it runs flawlessly on Windows 10 machines.
Learn more about Monitor mode :
brainly.com/question/29650773
#SPJ4
SANs typically use what virtualization?
They use the SCSI protocol for communication between servers. A well-known transform boundary found in California is the San Andreas fault.
What is San Andreas Fault?The San Andreas Fault has the most famous fault in the world.The San Andreas Fault is a place where two tectonic plates touch, the North American and Pacific Plates.
The plates are rigid (or almost rigid) slabs of rock that comprise the crust and upper mantle of the Earth. It is about 700 miles long as the crow flies and about 800 miles long when its curves are measured.
Therefore, They use the SCSI protocol for communication between servers. A well-known transform boundary found in California is the San Andreas fault.
Learn more about SCSI on:
https://brainly.com/question/24284823
#SPJ1
arrange the following list of functions in increasing order of growth rate. that is, if function g(n) follows function f (n), then it should be the case that f (n) is o(g(n)) (the base of logarithms is 2). justify in simple words. (you do not have to show detalied calculations.) f1(n)
(2^(n^3)) is an exponential function of given functions .
What is an example of an exponential function?
Calculating the exponential growth or decay of a given collection of data is done mathematically using an exponential function.
Exponential functions can be used, for instance, to estimate population changes, loan interest rates, bacterial growth, radioactive decay, or the spread of disease.
=>f1(n) = 2^(2^n)
=>f2(n) = 2^(n^3)
=>f3(n) = n^log(n)
=>f4(n) = n(logn)^3
=>f5(n) = n^4
=>f6(n) = 2^(2^log(logn))
=>f7(n) = (2^(n^3)) and is an exponential function .
Learn more about exponential function
brainly.com/question/14355665
#SPJ4
a technician needs to service a laptop computer that is experiencing an intermittent problem with the display. which of the following will be most effective at helping the technician complete the work in a timely and efficient manner? (select two.)
The best way to aid the technician in finishing the task quickly and effectively is to note and name the locations of the screws and cables before removing them.
What should one do as soon as possible when using a computer for work?Turning on the computer is the first thing to do. Locate and push the power button to accomplish this. On every computer, it will have the same icon for the power button, however it will be at a different location (shown below). Your computer takes a while to start up after being turned on.
Before physically opening a computer case, what should a technician do first?First, shut down the computer and unhook the power cord. Take off all external connections and cords. Remove the case's outermost screws next. Don't remove the screws holding the power supply to the case.
To know more about technician visit:-
https://brainly.com/question/13673497
#SPJ4
Describe how you would create 2groups in linux (Primary group, Secondary group) and add users to them.
The Windows Subsystem for Linux, which enables Windows to run ELF64 Linux programs, is now powered by WSL 2, a new version of the Windows Subsystem for Linux architecture.
What is Linux?Its main objectives are to add full system call compatibility and improve file system performance.
Although the interaction between these Linux binaries and Windows and your computer's hardware is altered by this new architecture, the user experience is still the same as in WSL 1.
It is possible to run specific Linux distributions using either the WSL 1 or WSL 2 architecture. You can run WSL 1 and WSL 2 distributions simultaneously, and you can upgrade or downgrade any distribution at any time.
Therefore, The Windows Subsystem for Linux, which enables Windows to run ELF64 Linux programs, is now powered by WSL 2, a new version of the Windows Subsystem for Linux architecture.
To learn more about Linux programmes, refer to the link:
https://brainly.com/question/30176895
#SPJ1
according to the text, subsetting can also be used to eliminate unwanted data such as: select all that apply!
Removing unneeded data from your dataset is a procedure known as data cleansing.
What is Data cleaning?Data cleaning is the process of repairing or eradicating inaccurate, corrupted, improperly formatted, duplicate, or insufficient data from a dataset. Data duplication or labeling errors are common when merging various data sources. Even though they may appear to be proper, wrong data might lead to erroneous results and algorithms. The procedures in the data cleaning process will differ from dataset to dataset, hence there is no one definite way to prescribe the precise steps. But in order to ensure that you are performing data cleaning in the proper manner each time, it is essential to create a template for your procedure.Removing unneeded data from your dataset is a procedure known as data cleansing. Transforming data from one structure or format into another is known as data transformation. Transforming and mapping data from one "raw" data form into another format for warehousing and analysis are procedures known as transformation, data wrangling, or data munging. This article is mostly concerned with the procedures for cleaning that data.To Learn more About data cleansing Refer To:
https://brainly.com/question/27748920
#SPJ4
You have an Azure AD tenant that contains a user named User1. The tenant also contains several user accounts from the Marketing department and the Human Resources department.
You need to ensure that User1 can manage the users from the Marketing department only.
What should you use?
Select only one answer.
Management groups
Administrative units
Custom Azure AD roles
Security groups that use dynamic user membership
You should use Administrative units to ensure that User1 can manage the users from the Marketing department only. Hence option B is correct.
What is the Azure AD tenant?An administrative unit is a container object in Azure Active Directory (Azure AD) that you can use to organize and manage users, groups, and devices. You can use administrative units to delegate administrative tasks, such as creating and managing users, to specific users or groups.
By assigning User1 to an administrative unit that contains the users from the Marketing department only, you can ensure that User1 can manage only those users and not the users from the Human Resources department.
Note that Management groups, Custom Azure AD roles, and Security groups that use dynamic user membership are other Azure resources but are not appropriate for this scenario because they don't provide the ability to delegate administrative tasks to specific users or groups and define a scope of management.
Learn more about Human Resources from
https://brainly.com/question/10583893
#SPJ1
Briefly explain a computer
Answer:
A computer is a machine that can perform a wide range of tasks, including data processing, storage, and communication. It is composed of both hardware and software. The hardware includes the physical components such as the central processing unit (CPU), memory, storage, and input/output devices such as a keyboard and monitor. The software includes the operating system, applications, and programming languages that run on the hardware. The CPU is the "brain" of the computer and it performs calculations and logical operations to execute instructions provided by the software. Computers can be used for a wide range of tasks, including word processing, data analysis, internet browsing, gaming, and many others. They can be found in various forms, including desktops, laptops, tablets, and smartphones.
You should know this but okay.
Explanation:
if a network scan reveals that port 88 is open and active, this means that the target network is using which of the following?
If a network scan reveals that port 88 is open and functional, the target network is using Kerberos Authentication.
What is the process of Kerberos authentication?The Kerberos authentication system can be used to verify a user's or host's identity. This article contains details about Kerberos authentication for Windows Server 2012 and Windows 8.
The Windows Server operating systems implement the Kerberos version 5 authentication protocol's public key authentication, data transfer, and delegation features.
By employing Kerberos authentication within a domain or in a forest, a user or service can access resources that administrators have allowed without having to continuously ask for credentials. When access to resources is sought across the forest, Kerberos preserves the credentials following the initial domain sign-on using Winlogon.
To know more about Window Server, visit:
https://brainly.com/question/14587803
#SPJ4
Allison exerts a steady net force of 48 N on a 16-kg shopping cart initially at rest for 1.2 s .
The acceleration when Allison exerts a steady net force of 48 N on a 16-kg shopping cart initially at rest for 1.2 s is 3m/s².
How to calculate the acceleration?It should be noted that acceleration sikoky has to do with the change in motion of an object.
From the information, Allison exerts a steady net force of 48 N on a 16-kg shopping cart initially at rest for 1.2 s .
It should be noted that the formula to find the acceleration will be:
= Force / Mass
= 48 / 16
= 3 m/s²
In conclusion, the acceleration when Allison exerts a steady net force is 3m/s².
Learn more about acceleration on:
brainly.com/question/460763
#SPJ1
Complete question
Allison exerts a steady net force of 48 N on a 16-kg shopping cart initially at rest for 1.2 s . Calculate the acceleration.
Which part of the following sql query enables an analyst to control the order of the calculations?
SQL query IN WHICh genre = "Action" ORDER BY word_count DESC . The database is instructed on how to arrange the information it returns by the ORDER BY phrase.
Describe Structured Query Language SQL:You can use SQL to access and modify databases. In 1986, the American National Standards Institute (ANSI) and the International Organization for Standardization (ISO) recognised SQL as a standard.
Structured Query Language, or SQL (pronounced "ess-que-el"), is a query language. A database can be communicated with using SQL. It is the accepted language for relational database systems, claims ANSI (American National Standards Institute).A common computer language called Structured Query Language (SQL) is used to extract, organise, manage, and alter data held in relational databases. As a result, SQL is described as a database languages that can carry out operations on databases made up of tables with rows and columns.The given are SQL commands -
DDL – Data Definition Language.DML – Data Manipulation Language.DQL – Data Query Language.DCL – Data Control Language.TCL – Transaction Control Language.To know more about the Structured Query Language, here
https://brainly.com/question/27960551
#SPJ4
tim, a system administrator, wants to simplify the provisioning and disabling of user accounts. what the server roles should tim install and configure?
Incoming emails are forwarded to certain clients or users via a message transfer agent.
Forwarding incoming messages to the appropriate end-user or destination is the MTA's primary duty. The common technique for transmitting emails over the Internet is called Simple Mail Transfer Protocol (SMTP). As a result, SMTP sends messages from the mail servers of the sender to the mail servers of the recipients. You are now prepared to interact with your files and folders. Double-clicking a folder in File Explorer will open it. All of the files kept in that folder are then visible to you. Observe that the address bar at the top of the window lets you know where a folder is located as well.
Learn more about emails here-
https://brainly.com/question/14666241
#SPJ4
create a c console application to calculate how many squares can fit in a circle. ask the user for the side of the square and the diameter of the circle. tell the user how many of those squares can fit in the circle. they do not have to be full squares. for instance, the answer can be 2.79. you learned how areas of circle and square are calculated in the 7th grade. if you do not remember, please search the internet for it. Requirements • Add the following comments in the beginning of your codes. o Your name, date, and purpose of the program • Add other proper comments as you code. • Tell the user what the program does. • Follow all naming rules and conventions. • Do not use magic numbers in your codes (Pl must be a constant). Use 3.14159265358979 for the value of PI. • Use proper data es for your variables. • Format the output to display two decimals. Wed Mar 10 Assignment Details CS 18 Programming in Patas MSRING 2021 - SECTION 2514 Instructions: Create a C++ console application to calculate how many circles can fit in a square. Ask the user for the side of the square and the diameter of the circle. Tell the user how many of those circles can fit in the square. They do not have to be full circles. For instance, the answer can be 2.79 You learned how areas of circle and square are calculated in the 5th grade. If you do not remember, please search the internet for it. Requirements • Add the following comments in the beginning of your codes. • Your name, date, and purpose of the program • Add other proper comments as you code. • Tell the user what the program does. • Follow all naming rules and conventions. . Do not use magic numbers in your codes (Pl must be a constant), Use 3.14159265358979 for the value of Pl. • Use proper data types for your variables. • Format the output to display two decimals. How to do it: This is how you should organize your codes. Declare all your variables first. • Ask the user for input. • Do the calculations. Display the result properly labeled. Do not display just a number. How to submit: Create a text document (Notepad or any other text file with .txt file extension). • Include your name plus the lab name in the name of the text file. Examples: Sarah Gonzales_Lab3, or Roy Brown_CirclesinSquare • Copy and paste your codes in the text file. • Upload the text file. Submit Assignment Next « Previous
Name - Jack
Date - 11-03-2021
Purpose of the program - to determine the number of circles that can fit within a square with a particular side.
How to write a program?#include<iostream>
#include<iomanip>
using namespace std;
const float PI = 3.14159265358979;
int main() {
// Variable declaration
float side_square, diameter_circle, area_square, area_circle, num_circle;
// Take input from the user
cout << "Enter the side of the square: ";
cin >> side_square;
cout << "Enter the diameter of the circle: ";
cin >> diameter_circle;
// Calculate area of the square and the circle
area_square = side_square * side_square;
area_circle = PI * diameter_circle * diameter_circle / 4;
// Calculate the number of circles that can fit inside the square
num_circle = area_square / area_circle;
// Dispaly the output
cout << fixed << setprecision(2) << endl;
cout << num_circle << " circles of diameter " << diameter_circle << " can fit inside the square of side " << side_square << endl;
}
To know more about Variable, visit:
https://brainly.com/question/15862026
#SPJ4
1-21. internally in a computer, with few exceptions, all computation is done using binary numbers. output, however, often uses ascii, which is formed by appending 011 to the left of a bcd code. thus, an algorithm that directly converts a binary integer to a bcd integer is very useful. here is one such algorithm: draw lines to bound the expected bcd decades to the left of the binary number. move the binary number one bit to the left. add 0011 to each bcd decade containing a binary value > 0100. repeat steps 2 and 3 until the last bit in the binary number has been moved into the least significant bcd decade position. read the bcd result. execute the algorithm for the binary number 1111000. execute the algorithm for the binary number 01110010111.
A class of binary encodings of decimal numbers called binary-coded decimal (BCD) is used in electronic and computing systems. In BCD, each digit is represented by a fixed number.
What algorithm should be used for the binary number 01110010111?As is the case with all positional numeral systems, the base of the decimal system—also known as base-ten—is ten, which is written 10 in decimal. It is the numerical base that modern civilizations use the most.
Table of binary to decimal conversions :Binary Number Decimal Number
1101 13
1110 14
1111 15
10000 16
Binary- coded decimal :A method of writing numbers that uses a four-digit binary code for each digit from 0 to 9 in a decimal (base 10) number is called binary-coded decimal. A method for converting decimal numbers into their binary equivalents is known as binary-coded decimal. A class of binary encodings of decimal numbers called binary-coded decimal uses four or eight bits to represent each digit. For a sign or other indication, special bit patterns may be utilized from time to time.
Learn more about Binary- coded decimal :
brainly.com/question/30360044
#SPJ4