Answer:
If reactant or product is removed, the equilibrium shifts to make more reactant or product, respectively, to make up for the loss.
If the reactant or product is removed, the equilibrium shifts to make more reactant or product, to make up for the loss.
decay mode for cesium-137
Answer:
Beta decay
Explanation:
Radioactive decay changes one nucleus to another. The type of decay that a particular nucleus undergoes depends on the number of neutrons and protons present in such nucleus.
Radioactive decay tends to lead to the attainment of a stable neutron/proton ratio.
The decay mode for cesium-137 is beta decay. The beta decay of cesium-137 yields Barium-137.
Beta decay decreases the neutron - proton ratio.
In the ground state, the valence electrons of a krypton atom are found in
1. The first shell
2. The outermost shell
3. Both the nucleus and the first shell
4. Both the first shell and the outermost shell
Answer: 2. The outermost shell
Explanation:
In an elements ground state, its electrons have the least amount of energy that they could have so they stay in their shells. When Krypton is in this state therefore, its valence electrons will stay in the outermost shell.
As Krypton has a total of 36 electrons in this state, there will be 8 valence electrons and they will all be in the outer shell.
Draw the major organic product(s) for the reaction. The starting material is a benzene ring with one substituent. The substituent is a nitrogen bonded to a hydrogen and a carbonyl that is bonded to a methyl group. THis reacts with tert butyl bromide and A l b r 3 to give the product.
Answer:
See Explanation
Explanation:
In electrophilic aromatic substitution, the benzene ring undergoes substitution when it is reacted with suitable electrophiles.
The products of electrophilic aromatic substitution depends on the substituents already present on the benzene ring. Some substituents activate the ring towards electrophilic substitution and direct the incoming electrophile to the ortho and para positions on the ring while some substituents deactivate the benzene ring towards electrophilic substitution and direct the incoming electrophlle to the meta position on the ring.
The amide substituent is moderately activating and is an ortho, para director hence the products shown in the mage attached to this answer.
hello HELP ME pLS ANYONE with this question I will give u 18 points pls I need real help here:((
Answer:
Boiling - The process of a liquid changing to gas.
Boiling point - The temperature at which a liquid boils.
Condensing - The process of a gas changing to a liquid.
Distillate - The liquid collect from the condenser.
Residue - The liquid left behind in the distillation flask.
Vapour - Another name for gas.
Hope it helps :)
How many moles of O2 did you produce the 8.31 moles of H2O
the equation is not present.
please help me quickly ????
Calculate the equilibrium solubility of silver arsenate
(Ksp = 6 * 10-23) in a solution that buffered to a pH of :
a) 3
b) 6
c) 9
For H3ASO4
Ka1 = 5 * 10-3
Ka2 = 1.1 * 10-7
Ka3 = 3.2 * 10-12
Answer:
sorry don't know the answer!!!
How it affects your lives or the lives of people near the area where soil erosion happened?
Please Answer! thanks!
Answer:
negatively
Explanation:
when soil erosion happens,by the agent of water for example,the soil will eventually lose it's valuable minerals and become infertile, people won't be able to grow crops there.
What would the IUPAC name be?
Answer:
methyl ethanoate
Explanation:
To name the compound given above, the following must be obtained:
1. Determine the functional group of the compound.
In this case, the functional group is R–COOR' where R and R' are alkyl groups. Thus, the compound is an ester.
2. Determine the longest chain before the functional group and the compound after the functional group.
In this case, the longest chain before the functional group is carbon 2 i.e ethane and the compound after the functional group is methyl.
3. Name the compound by naming the compound after the functional group first, followed by the compound before the functional group and ending it with –oate.
This is illustrated below:
After the functional group => methyl
Before the functional group => ethane
Name of the compound => methyl ethanoate
Look at the table of dissociation constants for some acids.
Acid Ka Acetic acid 18 x 10-6 1.2 x 10-2 Chlorous acid Nitrous acid 4.0 x 10 -4 Propionic acid 1.3 x 10-5
Which of these is the strongest acid?
acetic acid
chlorous acid
nitrous acid
propionic acid
*Answer is B*
Answer:
chlorous acid
Explanation:
The acidic equilibrium of weak acids, HX, occurs as follows:
HX ⇄ H+ + X-
Where Ka is written as:
Ka = [H+] [X-] / [HX]
The strongest acid is the acid that produce more H+. The acid with the higher Ka is the acid that produce more [H+] and is, thus, the strongest acid.
The higher Ka is the Ka of chlorus acid = 1.2x10-2
Right answer is:
chlorous acidAnswer:
chlorous acid :)
Explanation:
__________the lowest point on a wave
Answer:
The lowest point on a wave?
The lowest point on the wave is called as through or wave through.
The highest point on the wave is known as the crest or wave crest
The space between the crests is called the wave length.
The distance between the wave crest and the wave trough is called the wave height.
#CarryOnLearning
Answer:
Trough
Explanation:
The trough is the lowest point on a wave. The highest point on a wave is called a crest.
Find the horizontal range of a projectile launched at 15 degrees to the horizontal with speed of 40m/s
To Find :
The horizontal range of a projectile launched at 15 degrees to the horizontal with speed of 40 m/s.
Solution :
The horizontal range of a projectile is given by :
[tex]R = \dfrac{u^2 sin 2\theta}{g}[/tex] ( Here, g is acceleration due to gravity = 10 m/s² )
Putting all value in above equation :
[tex]R = \dfrac{40^2 \times sin (2 \times 15)}{10} \ m\\\\R = \dfrac{1600 \times 1}{2\times 10} \ m\\\\R = 80 \ m[/tex]
Therefore, the horizontal range of projectile is 80 m.
Consider the reaction 4FeS2 + 11O2 → 2Fe2O3 + 8SO2. If 8 moles of FeS2 react with 15 moles of O2, what is the limiting reactant? (3 points)
SO2
O2
Fe2O3
FeS2
Answer:
O2
Explanation:
for find the limiting reactant you must calculate the moles of the reactants from the amount that you have and from the MM:
MM FeS2 = 120n = 26.2g / 120g/mol = 0,218 mol
MM O2 = 32n = 5,44g/32g/mol = 0,17 mol
The limiting reactant is
O2
A potted plant is placed under a grow lamp, which provides 6,400 J of energy to the plant and the soil over the course of an hour. The specific heat capacity of the soil is about 0.840 J/g°C and the temperature goes up by 9.25°C of soil. How many grams of soil are there?
Answer:
823.7g
Explanation:
Using the formula as follows:
Q = m × c × ∆T
Where;
Q = amount of heat (J)
m = mass of substance (g)
c = specific heat capacity (J/g°C)
∆T = change in temperature (°C)
Using the information given in this question as follows:
Q = 6,400 J
m = ?
c of soil = 0.840 J/g°C
∆T = 9.25°C
Using Q = mc∆T
m = Q ÷ c∆T
m = 6,400 ÷ (0.840 × 9.25)
m = 6400 ÷ 7.77
m = 823.7g
Answer:
There are 823.68 grams.
Explanation:
Calorimetry is responsible for measuring the amount of heat generated or lost in certain physical or chemical processes.
Between heat and temperature there is a relationship of direct proportionality. The constant of proportionality depends on the substance that constitutes the body and its mass, and is the product of the specific heat by the mass of the body. In summary, the amount of heat Q that receives or transmits a mass m of a substance with specific heat C to raise its temperature from T1 to T2 is given by the formula:
Q= C*m* (T2- T1) = C*m* ΔT
In this case:
Q= 6400 JC= 0.840 [tex]\frac{J}{g*C}[/tex]m= ?ΔT= 9.25 CReplacing:
6400J= 0.840 [tex]\frac{J}{g*C}[/tex] *m* 9.25 C
Solving:
[tex]m=\frac{6400 J}{0.840 \frac{J}{g*C} *9.25 C}[/tex]
m=823.68 grams
There are 823.68 grams.
How do isotopes of the same atom react chemically? How do isotopes of the same atom compare in size?
Atoms of the same elements differing in the number of neutrons in their nuclei are known as isotopes. Thus, isotopes of an element have the same atomic number but different atomic mass number. Isotopes of an element have similar chemical properties but different physical properties.
What will be produced at the cathode during the electrolysis of an aqueous solution of magnesium iodide, MgI2
Answer:
At the cathode during the electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced
Explanation:
At cathode, reduction reaction takes place.
The dissociation of MgI2 in aqueous solution is Mg2+(aq) and 2I−(aq)
Here, the Iodine reduces to 2I−(aq) from state of 0 (MgI2) to state of -1 (2I−(aq))
Hence, at the cathode during the electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced
Answer:
During electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced at the cathode
Explanation:
Electrolysis is a process whereby ionic compound is broken down or degraded into smaller substances when electric current flow through it.
During electrolysis of magnesium iodide, At the cathode reduction reaction occur .
MgI2 is dissociated to is Mg2+(aq) and 2I−(aq)
Then Iodine is reduced to 2I−(aq) which is 0 in (MgI2) then change to -1 (2I−(aq))
Therefore;
During electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced at the cathode.
Magnesium metal reacts with a solution of silver nitrate in a single-replacement reaction, producing aqueous magnesium
nitrate and silver metal.
If a reaction starts with 0.480 mol Mg, how many moles of silver are produced?
You must show a proper set up for the calculation, the answer with a proper unit, and
the proper significant figures.
Answer:
0.960 mol of Ag
Explanation:
Mg(s) + 2AgNO3(aq) → Mg(NO3)2(aq) + 2Ag(s)
1.00 mol of Mg ---- 2.00 mol of Ag
0.480 mol of Mg ---- x
x = (0.480×2)/1 = 0.960 mol of Ag
Hydration of alkynes gives good yields of single compounds only with symmetrical or terminal alkynes. Draw the major organic product(s) formed when 3-methylcyclodecyne undergoes hydration in the presence of HgSO4 and H2SO4.
Answer:
Following are the solution to the given choice:
Explanation:
Hex-2-yne is just not alkyne symmetric, therefore two things respectively hexan-3-one and hexan-2-one are to be given.
The attached file it displayed the response along with the mechanism, please find the.
How many moles are 4.20 * 10 ^ 25 atoms of Ca?
Answer:
~69.744 moles of Ca
Explanation:
Using Avogadro's constant , we know that:
1 mole = 6.022 x 10^23 atoms
S0, the number of moles in 4.20 x 10^25 atoms of Ca:
=(4.20 x 10^25 x 1 )/(6.022 x 10^23)
~69.744 moles of Ca
Q2:How many atoms are in 0.35 moles of oxygen?
1 mole = 6.022 x 10^23 atoms
S0, the number of atoms in 0.35 moles of oxygen:
=[0.35 x (6.022 x 10^23)]
=2.1077 x 10^23 atoms of Oxygen
Hope it helps:)
A chemical bond formed when two atoms share three pairs of electrons is a ________ bond; it is best described as ________.
Answer:
Explanation:
A chemical bond formed when two atoms share three pairs of electrons is a triple bond; it is best described as covalent.
g What is the relationship between the moles of the limiting reagent and the change in temperature (i.e. directly proportional or indirectly proportional)
Answer:
number of moles is inversely proportional to the Temperature
Explanation:
As we know
PV = nRT
where P is the pressure
V is the volume
n is the number of moles
R is the gas constant
and T is the temperature
If we see the equation, we can find that n is inversely proportional to the Temperature
Lactic acid, which is found in milk products, has a pKa of 3.85. A 50.0 mL solution of 0.05 M lactic acid is titrated with 0.025 M sodium hydroxide. What is the pH of the solution after 64.0 mL of the sodium hydroxide has been added
The student kicks the soccer ball three times and I shouldn’t record the distance the amount of time the ball travels and the average speed in the table shown below soccer ball girl how many seconds did it take for the ball to travel 30 m during kick three
Answer: D it’s is 2.0 s
i think..
Explanation:
THIS NOT MY WORK. its for my sister. HELP HER
Answer:
Your answer will be b(molten material from the outer core makes its way to the surface of earth)
Explanation:
Answer:
C
Explanation:
I'm pretty sure molten material comes from the inner core. I think you can search up this though, try to find where molten material comes from. Goodluck!
Please help this is due tonight
If the temperature decreases, then the pressure will
What is the total mass of products formed when 64.18 grams of CH4 is burned with excess oxygen?
The MO diagram of CN is similar to N2. Based on the molecular orbital energy-level diagram of CN, which of the following statements are correct?
i. The CN bond order is 2.
ii. CN is diamagnetic.
iii. The bond enthalpy in CN- ion is higher than CN.
iv. CN has longer bond length than CN-
answer choices:
a. ii, iv
b. iii, iv
c. i, iii
d. i, ii
e. i, iv
Answer:
Nitrogen molecule (N2)
The electronic configuration of nitrogen (Z=7) = 1s2 2s2 2px12py12pz1.
The total number of electrons present in the nitrogen molecule (N2) is 14.
In order to maximize energy, these 14 electrons can be accommodated in the different molecular orbitals.
N2: KK'(σ2s)2 (σ*2s)2 (π2Px)2 (π2py)2 (σ2pz)2
Here (σ1s)2 (σ*1s)2 part of the configuration is abbreviated as KK’, which denotes the K shells of the two atoms. In calculating bond order, we can ignore KK’, as it includes two bonding and two antibonding electrons.
The bond order of N2can be calculated as follows:
Here, Nb = 10 and Na = 4
Bond order = (Nb−Na) /2
B.O = (10−4)/2
B.O = 3
So your answer should be C3.
About how long did it take for this population to reach the carrying capacity of this habitat
Answer:100
Explanation:
Write the formulas for each of the compounds in the following table.
1.
Ferric sulfate
2.
Strontium oxalate
3
.
Chromic acid
4.
Nickel(III) carbonate
5.
Silver bromate
6
.
Dinitrogen difluoride
1.
Magnesium molybdate
8.
Sodium hydrogen phosphate
Answer:
1. Ferric sulfate - Fe2(SO4)3
2. Strontium oxalate – SrC2O4
3. Chromic acid – CrO3
4. Nickel (III) carbonate – NiCO3
5. Silver bromate – AgBrO3
6. Dinitrogen difluoride - N2H2
7. Magnesium molybdate – MgMoO4
8. Sodium hydrogen phosphate - Na2PO4
If 10.0 moles of NO are reacted with 6.0 moles of O2, How many moles of NO2 are produced?
Answer:
We have to find out which of the reactants that is the Limiting Reagent.
The Limiting Reagent is the reactant that finishes before reaction is complete or simply put... Its the reactant that's NOT IN EXCESS.
We use the reactant that's not in excess to find the Number of moles of product because once that reactant is used up.... The reaction also ends or stops(hence the name;Limiting reactant).
Now
We have 10moles of NO
We also have 6moles of O2
The balanced equation of Reaction is
2NO + O2 ===> 2NO2
Now
looking at this equation
2moles of NO is required to react with 1mole of O2
So since we have NO=10moles and O2 = 6moles
It means that
20moles of NO is required to react with 6 moles of O2.
We were only given 10moles of NO and this is not even enough to react with the whole 6moles of Oxygen because from what we just discovered... We need 20moles of NO to react with all 6moles of O2.
So
This means that NO is the LIMITING REACTANT. It is in short supply and would be used up before the whole reaction takes place.
So we use the limiting reactant to find the Number of Moles of Product formed.
Now
From the eqn of reaction
2moles of NO forms 2Moles of NO2.
Their Mole ratio is 2:2 or 1:1...
This simply means that an equal amount of NO2 will be Produced
MEANING.... 10 MOLES OF NO2 IS PRODUCED.
HAVE A GREAT DAY!!!