The Millikan experiment was carried out to determine the value of the electric charge carried by an electron.'
The method was to suspend oil droplets in a uniform electric field between two metal plates by adjusting the voltage applied to the plates such that the force on the droplet was balanced by the force of gravity. The excess or deficit charge on the droplet could then be calculated and from this,
The charge carried by an electron could be determined.What is an oil drop?An oil drop is a charged droplet of oil that is formed in a high voltage field. An oil droplet carries an electric charge because when it comes into contact with an ion.
To know more about Millikan visit:
https://brainly.com/question/32827743
#SPJ11
6. A golf cart of 330Kg of mass moves horizontally and without
friction at 5m/s when
a 70Kg person originally at rest gets on the golf cart. What will
be the final speed
of the cart with the person?
The final speed of the golf cart with the person will be 4.26 m/s
Mass of golf cart = 330 kgMass of person = 70 kgTotal mass of the system, m = 330 + 70 = 400 kgInitial velocity of the golf cart, u = 5 m/sFinal velocity of the golf cart with the person, v = ?,
As per the law of conservation of momentum: Initial momentum of the system, p1 = m × u = 400 × 5 = 2000 kg m/sNow, the person gets on the golf cart. Hence, the system now becomes of 400 + 70 = 470 kg of mass.Let the final velocity of the system be v'.Then, the final momentum of the system will be: p2 = m × v' = 470 × v' kg m/sNow, as per the law of conservation of momentum:p1 = p2⇒ 2000 = 470 × v'⇒ v' = 2000/470 m/s⇒ v' = 4.26 m/s.
Therefore, the final velocity of the golf cart with the person will be 4.26 m/s. (rounded off to 2 decimal places).Hence, the final speed of the golf cart with the person will be 4.26 m/s (approximately).
Learn more on momentum here:
brainly.com/question/24030570
#SPJ11
What is the critical angle for light going from ethanol to air? Submit Answer Incorrect. Tries 1/40 Previous Tries
The critical angle for light going from ethanol to air the critical angle for light going from ethanol to air is approximately 48.6 degrees.
To calculate the critical angle for light going from ethanol to air, we need to use Snell's law, which relates the angles of incidence and refraction for light traveling between two different media. Snell's law is given by:
n₁ * sin(θ₁) = n₂ * sin(θ₂)
Where:
n₁ is the refractive index of the initial medium (ethanol)
n₂ is the refractive index of the final medium (air)
θ₁ is the angle of incidence
θ₂ is the angle of refraction
The critical angle occurs when the angle of refraction is 90 degrees (light travels along the boundary). So we can rewrite Snell's law as:
n₁ * sin(θ_c) = n₂ * sin(90)
Since sin(90) = 1, the equation simplifies to:
n₁ * sin(θ_c) = n₂
To find the critical angle (θ_c), we need to know the refractive indices of ethanol and air. The refractive index of ethanol (n₁) is approximately 1.36, and the refractive index of air (n₂) is approximately 1.
Plugging in the values, we get:
1.36 * sin(θ_c) = 1
Now, we can solve for the critical angle:
sin(θ_c) = 1 / 1.36
θ_c = arcsin(1 / 1.36)
Using a calculator, we find:
θ_c ≈ 48.6 degrees
Therefore, the critical angle for light going from ethanol to air is approximately 48.6 degrees.
To know more about ethanol refer here:
https://brainly.com/question/29294678#
#SPJ11
Transcribed image text: A rotating fan completes 1150 revolutions every minute. Consider the tip of the blade, at a radius of 120 cm. What is the linear distance moved when the tip moves through one revolution? What is the tip's speed and the magnitude of its acceleration? What is the period of the motion? Sebuah kipas yang berputar membuat 1150 putaran lengkap seminit. Pertimbangkan hujung bilah kipas, pada jejari 120 cm Berapakah jarak yang dibuat oleh hujung bilah kipas di dalam sutu putaran? Berapakah laju dan magnitud pecutan hujung bilah kipas? Berapakah tempoh gerakan? [16 marks / 16 markah] (a Light from a helium-neon laser (630 nm) is incident on a pair of slits. Interference pattern can be seen on a screen 2.0 m from the slits and the bright fringes are separated by 1.40 cm. What is the slit separation? A grating has 5000 lines per cm. Determine the angular separation between the central maximum and the second-order bright fringe if the wavelength of violet light is 410 nm. (b) (a) Cahaya dari helium-neon laser (630 nm) melalui sepasang celahan. Corak interferens dapat dilihat pada layar yang jauhnya 2.0 m dari celahan dan pinggir-pinggir terang dipisahkan sejauh 1.40 cm. Berapakah jarak pisahan antara celahan? Satu parutan mempunyai 5000 garisan per cm. Tentukan sudut pemisahan di antara pinggir terang pusat dengan pinggir terang tertib kedua jika panjang gelombang cahaya ungu ialah 410 nm. [16 marks / 16 markah] (b)
When the rotating fan completes one revolution, the tip of the blade moves a linear distance equal to the circumference of a circle with a radius of 120 cm. The tip's speed is the linear distance moved per unit of time, and its acceleration can be calculated using the formula for centripetal acceleration. The period of motion is the time taken for one complete revolution.
To find the linear distance moved by the tip of the blade in one revolution, we can use the formula for the circumference of a circle: C = 2πr, where r is the radius. Substituting the given radius of 120 cm, we have C = 2π(120 cm) = 240π cm.
The tip's speed is the linear distance moved per unit of time. Since the fan completes 1150 revolutions per minute, we can calculate the speed by multiplying the linear distance moved in one revolution by the number of revolutions per minute and converting to a consistent unit. Let's convert minutes to seconds by dividing by 60:
Speed = (240π cm/rev) * (1150 rev/min) * (1 min/60 s) = 4600π/3 cm/s.
To find the magnitude of the tip's acceleration, we can use the formula for centripetal acceleration: a = v²/r, where v is the speed and r is the radius. Substituting the given values, we have:
Acceleration = (4600π/3 cm/s)² / (120 cm) = 211200π²/9 cm/s².
The period of motion is the time taken for one complete revolution. Since the fan completes 1150 revolutions per minute, we can calculate the period by dividing the total time in minutes by the number of revolutions:
Period = (1 min)/(1150 rev/min) = 1/1150 min/rev.
In summary, when the fan completes one revolution, the tip of the blade moves a linear distance of 240π cm. The tip's speed is 4600π/3 cm/s, and the magnitude of its acceleration is 211200π²/9 cm/s². The period of motion is 1/1150 min/rev.
To know more about centripetal acceleration refer here:
https://brainly.com/question/32812920#
#SPJ11
A mass attached to the end of a spring is oscillating with a period of 2.25s on a horontal Inctionless surface. The mass was released from restat from the position 0.0460 m (a) Determine the location of the mass att - 5.515 m (b) Determine if the mass is moving in the positive or negative x direction at t-5515. O positive x direction O negative x direction
a) The location of the mass at -5.515 m is not provided.
(b) The direction of motion at t = -5.515 s cannot be determined without additional information.
a)The location of the mass at -5.515 m is not provided in the given information. Therefore, it is not possible to determine the position of the mass at that specific point.
(b) To determine the direction of motion at t = -5.515 s, we need additional information. The given data only includes the period of oscillation and the initial position of the mass. However, information about the velocity or the phase of the oscillation is required to determine the direction of motion at a specific time.
In an oscillatory motion, the mass attached to a spring moves back and forth around its equilibrium position. The direction of motion depends on the phase of the oscillation at a particular time. Without knowing the phase or velocity of the mass at t = -5.515 s, we cannot determine whether it is moving in the positive or negative x direction.
To accurately determine the direction of motion at a specific time, additional information such as the amplitude, phase, or initial velocity would be needed.
To learn more about mass click here
brainly.com/question/86444
#SPJ11
A student measured the mass of a meter stick to be 150 gm. The student then placed a knife edge on 30-cm mark of the stick. If the student placed a 500-gm weight on 5-cm mark and a 300-gm weight on somewhere on the meter stick, the meter stick then was balanced. Where (cm mark) did the student place the 300- gram weight?
Therefore, the student placed the 300-gram weight at 38.33 cm mark to balance the meter stick.
Given data:A student measured the mass of a meter stick to be 150 gm.
A knife edge was placed on 30-cm mark of the stick.
A 500-gm weight was placed on 5-cm mark and a 300-gm weight was placed somewhere on the meter stick. The meter stick was balanced.
Let's assume that the 300-gm weight is placed at x cm mark.
According to the principle of moments, the moment of the force clockwise about the fulcrum is equal to the moment of force anticlockwise about the fulcrum.
Now, the clockwise moment is given as:
M1 = 500g × 5cm
= 2500g cm
And, the anticlockwise moment is given as:
M2 = 300g × (x - 30) cm
= 300x - 9000 cm (Because the knife edge is placed on the 30-cm mark)
According to the principle of moments:
M1 = M2 ⇒ 2500g cm
= 300x - 9000 cm⇒ 2500
= 300x - 9000⇒ 300x
= 2500 + 9000⇒ 300x
= 11500⇒ x = 11500/300⇒ x
= 38.33 cm
Therefore, the student placed the 300-gram weight at 38.33 cm mark to balance the meter stick.
To know more about student visit;
brainly.com/question/28047438
#SPJ11
At one instant, 7 = (-3.61 î+ 3.909 - 5.97 ) mis is the velocity of a proton in a uniform magnetic field B = (1.801-3.631 +7.90 Â) mT. At that instant what are the (a) x.(b) y, and (c) 2 components of the magnetic force on the proton? What are (d) the angle between Vand F and (e)the angle between 7 and B?
At one instant, 7 = (-3.61 î+ 3.909 - 5.97 ) m is the velocity of a proton in a uniform magnetic field B = (1.801-3.631 +7.90 Â) mT then, (a) x-component of magnetic force on proton is 5.695 x 10⁻¹⁷N ; (b) y-component of magnetic force on proton is -1.498 x 10⁻¹⁷N ; (c) z-component of magnetic force on proton is -1.936 x 10⁻¹⁷N ; (d) angle between v and F is 123.48° (approx) and (e) angle between v and B is 94.53° (approx).
Given :
Velocity of the proton, v = -3.61i+3.909j-5.97k m/s
The magnetic field, B = 1.801i-3.631j+7.90k mT
Conversion of magnetic field from mT to Tesla = 1 mT = 10⁻³ T
=> B = 1.801i x 10⁻³ -3.631j x 10⁻³ + 7.90k x 10⁻³ T
= 1.801 x 10⁻³i - 3.631 x 10⁻³j + 7.90 x 10⁻³k T
We know that magnetic force experienced by a moving charge particle q is given by, F = q(v x B)
where, v = velocity of charge particle
q = charge of particle
B = magnetic field
In Cartesian vector form, F = q[(vyBz - vzBy)i + (vzBx - vxBz)j + (vxBy - vyBx)k]
Part (a) To find x-component of magnetic force on proton,
Fx = q(vyBz - vzBy)
Fx = 1.6 x 10⁻¹⁹C x [(3.909 x 10⁻³) x (7.90 x 10⁻³) - (-5.97 x 10⁻³) x (-3.631 x 10⁻³)]
Fx = 5.695 x 10⁻¹⁷N
Part (b)To find y-component of magnetic force on proton,
Fy = q(vzBx - vxBz)
Fy = 1.6 x 10⁻¹⁹C x [(-3.61 x 10⁻³) x (7.90 x 10⁻³) - (-5.97 x 10⁻³) x (1.801 x 10⁻³)]
Fy = -1.498 x 10⁻¹⁷N
Part (c) To find z-component of magnetic force on proton,
Fz = q(vxBy - vyBx)
Fz = 1.6 x 10⁻¹⁹C x [(-3.61 x 10⁻³) x (-3.631 x 10⁻³) - (3.909 x 10⁻³) x (1.801 x 10⁻³)]
Fz = -1.936 x 10⁻¹⁷N
Part (d) Angle between v and F can be calculated as, cos θ = (v . F) / (|v| x |F|)θ
= cos⁻¹ [(v . F) / (|v| x |F|)]θ
= cos⁻¹ [(3.909 x 5.695 - 5.97 x 1.498 - 3.61 x (-1.936)) / √(3.909² + 5.97² + (-3.61)²) x √(5.695² + (-1.498)² + (-1.936)²)]θ
= 123.48° (approx)
Part (e) Angle between v and B can be calculated as, cos θ = (v . B) / (|v| x |B|)θ
= cos⁻¹ [(v . B) / (|v| x |B|)]θ
= cos⁻¹ [(-3.61 x 1.801 + 3.909 x (-3.631) - 5.97 x 7.90) / √(3.61² + 3.909² + 5.97²) x √(1.801² + 3.631² + 7.90²)]θ
= 94.53° (approx)
Therefore, the corect answers are : (a) 5.695 x 10⁻¹⁷N
(b) -1.498 x 10⁻¹⁷N
(c) -1.936 x 10⁻¹⁷N
(d) 123.48° (approx)
(e) 94.53° (approx).
To learn more about magnetic field :
https://brainly.com/question/14411049
#SPJ11
Find the magnitude of the electric field where the vertical
distance measured from the filament length is 34 cm when there is a
long straight filament with a charge of -62 μC/m per unit
length.
E=___
The magnitude of the electric field where the vertical distance measured from the filament length is 34 cm when there is a long straight filament with a charge of -62 μC/m per unit length is 2.22x10^5 N/C. Therefore, E= 2.22 x 10^5 N/C. A charged particle placed in an electric field experiences an electric force.
The magnitude of the electric field where the vertical distance measured from the filament length is 34 cm when there is a long straight filament with a charge of -62 μC/m per unit length is 2.22x10^5 N/C. Therefore, E= 2.22 x 10^5 N/C. A charged particle placed in an electric field experiences an electric force. The magnitude of the electric field is defined as the force per unit charge that acts on a positive test charge placed in that field. The electric field is represented by E.
The electric field is a vector quantity, and the direction of the electric field is the direction of the electric force acting on the test charge. The electric field is a function of distance from the charged object and the amount of charge present on the object. The electric field can be represented using field lines. The electric field lines start from the positive charge and end at the negative charge. The electric field due to a long straight filament with a charge of -62 μC/m per unit length is given by, E = (kλ)/r
where, k is Coulomb's constant = 9 x 109 N m2/C2λ is the charge per unit length
r is the distance from the filament
E = (9 x 109 N m2/C2) (-62 x 10-6 C/m) / 0.34 m = 2.22 x 105 N/C
To know more about electric field visit:
https://brainly.com/question/30544719
#SPJ11
3. (4 points) A dog chewed a smoke detector into pieces and swallowed its Am-241 radioactive source. The source has an activity of 37 kBq primarily composed of alpha particles with an energy of 5.486 MeV per decay. A tissue mass of 0.25 kg of the dog's intestine completely absorbed the alpha particle energy as the source traveled through his digestive tract. The source was then "passed" in the dog's feces after 12 hours. Assume that the RBE for an alpha particle is 10. Calculate: a) the total Absorbed Energy expressed in the correct units b) the Absorbed Dose expressed in the correct units c) the Dose Equivalent expressed in the correct units d) the ratio of the dog's Dose Equivalent to the recommended annual human exposure
a) Total Absorbed Energy:
The absorbed energy is the product of the activity (in decays per second) and the energy per decay (in joules). We need to convert kilobecquerels to becquerels and megaelectronvolts to joules.
Total Absorbed Energy = Activity × Energy per decay
Total Absorbed Energy ≈ 3.04096 × 10^(-6) J
b) Absorbed Dose:
The absorbed dose is the absorbed energy divided by the mass of the tissue.
Absorbed Dose = Total Absorbed Energy / Tissue Mass
Absorbed Dose = 3.04096 × 10^(-6) J / 0.25 kg
Absorbed Dose = 12.16384 μGy (since 1 Gy = 1 J/kg, and 1 μGy = 10^(-6) Gy)
c) Dose Equivalent:
The dose equivalent takes into account the relative biological effectiveness (RBE) of the radiation. We multiply the absorbed dose by the RBE value for alpha particles.
Dose Equivalent = 121.6384 μSv (since 1 Sv = 1 Gy, and 1 μSv = 10^(-6) Sv)
Ratio = Dose Equivalent (Dog) / Recommended Annual Human Exposure
Ratio = 121.6384 μSv / 1 mSv
Ratio = 0.1216384
Therefore, the ratio of the dog's dose equivalent to the recommended annual human exposure is approximately 0.1216384.
Learn more about energy here : brainly.com/question/1932868
#SPJ11
The electronic density of a metal is 4.2*1024 atoms/m3 and has a refraction index n = 1.53 + i2.3.
a)find the plasma frequency. The charge of electrons is qe = 1.6*10-19C and the mass of these e- is me=9.1*10-31kg , єo = 8.85*10-12 c2/Nm2.
b) please elaborate in detail if this imaginary metal is transparent or not
c) calculate the skin depth for a frequency ω = 2*1013 rad/s
a) The plasma frequency is approximately [tex]1.7810^{16}[/tex] rad/s.
b) The imaginary metal is not transparent.
c) The skin depth is approximately [tex]6.3410^{-8}[/tex] m.
The plasma frequency is calculated using the given electronic density, charge of electrons, electron mass, and vacuum permittivity. The plasma frequency (ωp) can be calculated using the formula ωp = √([tex]Ne^{2}[/tex] / (me * ε0)). Plugging in the given values, we have Ne = [tex]4.210^{24}[/tex] atoms/[tex]m^{3}[/tex], e = [tex]1.610^{19}[/tex] C, me = [tex]9.110^{-31}[/tex] kg, and ε0 = 8.8510-12 [tex]C^{2}[/tex]/[tex]Nm^{2}[/tex]. Evaluating the expression, the plasma frequency is approximately 1.78*[tex]10^{16}[/tex] rad/s.
The presence of a non-zero imaginary part in the refractive index indicates that the metal is not transparent. To determine if the imaginary metal is transparent or not, we consider the imaginary part of the refractive index (2.3). Since the absorption coefficient is non-zero, the metal is not transparent.
The skin depth is determined by considering the angular frequency, conductivity, and permeability of free space. The skin depth (δ) can be calculated using the formula δ = √(2 / (ωμσ)), where ω is the angular frequency, μ is the permeability of free space, and σ is the conductivity of the metal.
To learn more about frequency click here:
brainly.com/question/254161
#SPJ11
Timer A typical exposure from a dental X-ray is 7 mrem. A typical human head has a mass of 4 ka. How much energy is deposited in your head when you got an X-ray?
The energy deposited in your head during an X-ray is approximately 0.028 Joules.
To calculate the energy deposited in your head during an X-ray, we can use the given exposure of 7 mrem (millirem) and the mass of a typical human head, which is 4 kg.
First, let's convert the exposure from millirem to rem. Since 1 rem is equal to 0.001 J/kg, we can convert it as follows:
Exposure = 7 mrem × (1 rem / 1000 mrem) = 0.007 rem
Next, we can use the formula:
Energy = Exposure × Mass
Substituting the values into the equation:
Energy = 0.007 rem × 4 kg = 0.028 J
Therefore, approximately 0.028 Joules of energy is deposited in your head during an X-ray. This represents the amount of energy absorbed by the tissues in your head during the X-ray procedure. It's important to note that X-ray exposures are carefully controlled to minimize the risks and ensure the safety of patients.
To learn more about energy deposited, Visit:
https://brainly.com/question/31980920
#SPJ11
6 A speedometer estimates linear speed based on angular speed of tires. If you switch to speed. larger tires, then the speedometer will read a lower linear speed than the true linear 7. Two spheres have the same mass and radius but one is hollow. If you roll both of them from the same height, the hollow one reaches to the ground later. 8. Two disks spin with the same angular momentum, but disk 1 has more Kinetic Energy than disk 2. Disk two has a larger moment of inertia. 9. You hold a spinning bicycle wheel while standing on a turntable. If you flip the wheel over, the turntable will move in the same direction. 10. If you used 5000 joules to throw a ball, it would travel faster if you threw in such a way that it is rotating
6. When switching to larger tires, the speedometer will display a lower linear speed than the true linear speed. This is because larger tires have a greater circumference, resulting in each revolution covering a longer distance compared to the original tire size.
The speedometer is calibrated based on the original tire size and assumes a certain distance per revolution. As a result, with larger tires, the speedometer underestimates the actual linear speed.
7. Two spheres with the same mass and radius are rolled from the same height. The hollow sphere reaches the ground later than the solid sphere. This is due to the hollow sphere having less mass and, consequently, less inertia. It requires less force to accelerate the hollow sphere compared to the solid sphere. As a result, the hollow sphere accelerates slower and takes more time to reach the ground.
8. Two disks with the same angular momentum are compared, but disk 1 has more kinetic energy than disk 2. Disk 2 has a larger moment of inertia, which is a measure of the resistance to rotational motion. The disk with greater kinetic energy has a higher velocity than the disk with lower kinetic energy. While both disks possess the same angular momentum, their different moments of inertia contribute to the difference in kinetic energy.
9. When a spinning bicycle wheel is flipped over while standing on a turntable, the turntable moves in the same direction. This phenomenon is explained by the conservation of angular momentum. Flipping the wheel changes its angular momentum, and to conserve angular momentum, the turntable moves in the opposite direction to compensate for the change.
10. If a ball is thrown with 5000 joules of energy and it is rotating, it will travel faster. The conservation of angular momentum states that when the net external torque acting on a system is zero, angular momentum is conserved. As the ball is thrown with spin, it possesses angular momentum that remains constant. The rotation of the ball does not affect its forward velocity, which is determined by the initial kinetic energy. However, the rotation influences the trajectory of the ball.
To learn more about speedometer, you can visit the following link:
brainly.com/question/32573142
#SPJ11
A paperweight is made of a solid glass hemisphere of index of refraction 1.53. The radius of the circular cross section is 4.0 cm. The hemisphere is placed on its flat surface, with the center directly over a 2.5 mm long line drawn on a sheet of paper. What length of line is seen by someone looking vertically down on the hemisphere?
The length of the line seen by someone looking vertically down on the glass hemisphere is 1.73 mm.
When light travels from one medium (air) to another (glass), it undergoes refraction due to the change in the speed of light. In this case, the light from the line on the paper enters the glass hemisphere, and the glass-air interface acts as the refracting surface.Since the line is drawn on the paper and the observer is looking vertically down on the hemisphere, we can consider a right triangle formed by the line, the center of the hemisphere, and the point where the line enters the glass. The length of the line seen will be the hypotenuse of this triangle.Using the properties of refraction, we can calculate the angle of incidence (θ) at which the light enters the glass hemisphere. The sine of the angle of incidence is given by the ratio of the radius of the circular cross-section (4.0 cm) to the distance between the center of the hemisphere and the point where the line enters the glass (2.5 mm).
To learn more about hemisphere:
https://brainly.com/question/867172
#SPJ11
A parallel-plate capacitor has plates with area 2.30x10-² m² separated by 2.00 mm of Teflon. ▾ Part A Calculate the charge on the plates when they are charged to a potential difference of 13.0 V. Express your answer in coulombs. LIVE ΑΣΦ ▼ Submit Request Answer Part B E= Use Gauss's law to calculate the electric field inside the Teflon. Express your answer in newtons per coulomb. 195| ΑΣΦ Submit Request Answer Part C BIL B ? ? C N/C Use Gauss's law to calculate the electric field if the voltage source is disconnected and the Teflon is removed. Express your answer in newtons per coulomb.
A. The charge on the plates of the parallel-plate capacitor, when charged to a potential difference of 13.0 V, is 5.95 x 10⁻⁷ C (coulombs).
B. The electric field inside the Teflon, calculated using Gauss's law, is 6.50 x 10⁶ N/C (newtons per coulomb).
C. When the voltage source is disconnected and the Teflon is removed, the electric field becomes zero since there are no charges or electric field present.
A. To calculate the charge on the plates, we use the formula Q = C · V, where Q is the charge, C is the capacitance, and V is the potential difference. The capacitance of a parallel-plate capacitor is given by C = ε₀ · (A/d), where ε₀ is the permittivity of free space, A is the area of the plates, and d is the distance between the plates. Substituting the given values, we find the charge on the plates to be 5.95 x 10⁻⁷ C.
B. To calculate the electric field inside the Teflon using Gauss's law, we consider a Gaussian surface between the plates. Since Teflon is a dielectric material, it has a relative permittivity εᵣ. Gauss's law states that the electric flux through a closed surface is equal to the charge enclosed divided by the permittivity of the material.
Since the electric field is uniform between the plates, the flux is simply E · A, where E is the electric field and A is the area of the plates. Setting the electric flux equal to Q/ε₀, where Q is the charge on the plates, we can solve for the electric field E. Substituting the given values, we find the electric field inside the Teflon to be 6.50 x 10⁶ N/C.
C. When the voltage source is disconnected and the Teflon is removed, the capacitor is no longer connected to a potential difference, and therefore, no charges are present on the plates. According to Gauss's law, in the absence of any charges, the electric field is zero. Thus, when the Teflon is removed, the electric field becomes zero between the plates.
To know more about parallel-plate capacitor refer here:
https://brainly.com/question/30906246#
#SPJ11
Question 2 (MCQ QUESTION: answer in ULWAZI) Consider the normalised eigenstates for a particle in a 1 dimensional box as shown: Eigenstates v The probability of finding a particle in any of the three energy states is: Possible answers (order may change in ULWAZI Greatest on the left of the box Greatest on the right of the box Greatest in the centre of the box The same everywhere inside the box Zero nowhere in the box [3 Marks] [3].
The probability of finding a particle in any of the three energy states is the same everywhere inside the box.
The probability of finding a particle in any of the three energy states is the same everywhere inside the box. Consider the normalised eigenstates for a particle in a 1-dimensional box as shown: Eigenstates. The normalised eigenstates for a particle in a 1-dimensional box are as follows:Here, A is the normalization constant.\
To find the probability of finding a particle in any of the three energy states, we need to find the probability density function (PDF), ψ²(x).Probability density function (PDF), ψ²(x) is given as follows:Here, ψ(x) is the wave function, which is the normalised eigenstate for a particle in a 1-dimensional box.
To know more about probability:
https://brainly.com/question/31828911
#SPJ11
8. b) Find the total excess charge on the outer surface in
uc.
9. Find the magnitude of the electric field at r = 9.5cm in
N/C
10. Find the magnitude the electric field at r = 15cm in 10^6
N/C
Given data,Inner radius (r1) = 5cmOuter radius (r2) = 9cmPotential difference between the cylinders = 1200VPermittivity of free space 8.854 × 10−12 C²/N·m²a).
Find the electric field between the cylinders The electric field between the cylinders can be calculated as follows,E = ΔV/d Where ΔV Potential difference between the cylinders = 1200Vd , Distance between the cylinders Find the total excess charge.
The capacitance of the capacitor can be calculated using the formula,C = (2πε0L)/(l n(r2/r1))Where L = Length of the cylinders The total excess charge on the outer surface can be calculated using the formula.cylinder between the cylinders the electric field.
To know more about difference visit:
https://brainly.com/question/30241588
#SPJ11
Resolve the given vector into its x-component and y-component. The given angle 0 is measured counterclockwise from the positive x-axis (in standard position). Magnitude 2.24 mN, 0 = 209.47° The x-component Ax is mN. (Round to the nearest hundredth as needed.) The y-component A, ismN. (Round to the nearest hundredth as needed.)
The x-component (Ax) is approximately -1.54 mN and the y-component (Ay) is approximately -1.97 mN.
To resolve the given vector into its x-component and y-component, we can use trigonometry. The magnitude of the vector is given as 2.24 mN, and the angle is 209.47° counterclockwise from the positive x-axis.
To find the x-component (Ax), we can use the cosine function:
Ax = magnitude * cos(angle)
Substituting the given values:
Ax = 2.24 mN * cos(209.47°)
Calculating the value:
Ax ≈ -1.54 mN
To find the y-component (Ay), we can use the sine function:
Ay = magnitude * sin(angle)
Substituting the given values:
Ay = 2.24 mN * sin(209.47°)
Calculating the value:
Ay ≈ -1.97 mN
To know more about x-component refer to-
https://brainly.com/question/29030586
#SPJ11
3) A Cell whose internal resistance 1s 0.52 delivers a Current of LA to an external register. The lost voltage of the cell 12
Answer: I had they same qustion
Explanation:
A particle with a velocity of 5.00x 10^3 m/s enters a region of
uniform magnetic fields. Calculate the magnitude and direction of
the electric field if the particle is to pass through the
undeflected.
The required magnitude and direction of the electric field to pass the particle undeflected is given by:|E| = 5.00 x 10³ x B (upwards)
A particle with a velocity of 5.00 x 10³ m/s enters a region of uniform magnetic fields. The magnitude and direction of the electric field if the particle is to pass through undeflected can be calculated through the following steps:
Step 1:Identify the given information
In the given problem, we are given:
Particle velocity, v = 5.00 x 10³ m/s
Magnetic field, B = given
Direction of magnetic field,
let’s assume it to be perpendicular to the plane of paper
Magnitude of electric field, E = to be calculated
Step 2:Find the magnetic force exerted on the particle
The magnetic force on the charged particle moving in a magnetic field is given by:
F = q(v x B) where,q is the charge on the particle
v is the velocity of the particle
B is the magnetic field acting on the particle
By the right-hand rule, it can be determined that the magnetic force, F acts perpendicular to the plane of the paper in this problem.
The direction of magnetic force can be found by the Fleming’s Left-hand rule. In this case, the particle is negatively charged as it is an electron. So the direction of force on the particle would be opposite to that of the direction of velocity of the particle in the magnetic field. Therefore, the magnetic force on the particle would be directed downwards as shown in the figure below.
Step 3: Find the electric field to counterbalance the magnetic force. In order to counterbalance the magnetic force on the electron, there must be an electric force acting on it as well. The electric force on the charged particle moving in an electric field is given by:
F = qE where, E is the electric field acting on the particle
By the right-hand rule, the direction of electric force on the particle can be found to be upwards in this case. Since the electron is undeflected, the magnetic force on it must be equal and opposite to the electric force on it. Hence,
q(v x B) = qE
Dividing by q, we get: v x B = E
Also, we know that the magnitude of the magnetic force on the particle is given by:
F = Bqv
where, v is the magnitude of velocity of the particle
Substituting the value of the magnetic force from this equation in the equation above, we get:
v x B = (Bqv)/qv = E
The magnitude of the electric field required to counterbalance the magnetic force is given by:
|E| = vB= 5.00 x 10³ x B
As we know the direction of the electric field is upwards, perpendicular to both the direction of the magnetic field and the velocity of the particle. Therefore, the required magnitude and direction of the electric field to pass the particle undeflected is given by:
|E| = 5.00 x 10³ x B (upwards)
The magnitude of the electric field required to counterbalance the magnetic force is given by |E| = 5.00 x 10³ x B (upwards).
Learn more about electric field https://brainly.com/question/19878202
#SPJ11
A series RLC Circuit has resonance angular frequency 2.00x10³ rad/s. When it is operating at some input frequency, XL=12.0Ω and XC=8.00Ω . (c). If it is possible, find L and C. If it is not possible, give a compact expression for the condition that L and C must satisfy..
For the given conditions, the values of L and C are L = 6.00 mH and C = 6.25 μF (microfarads), respectively.
To find the values of L (inductance) and C (capacitance) for the given series RLC circuit, we can use the resonance angular frequency (ω) and the values of XL (inductive reactance) and XC (capacitive reactance). The condition for resonance in a series RLC circuit is given by:
[tex]X_L = X_C[/tex]
Using the formula for inductive reactance [tex]X_L[/tex] = ωL and capacitive reactance [tex]X_C[/tex] = 1/(ωC), we can substitute these values into the resonance condition:
ωL = 1/(ωC)
Rearranging the equation, we have:
L = 1/(ω²C)
Now we can substitute the given values:
[tex]X_L[/tex] = 12.0 Ω
[tex]X_C[/tex] = 8.00 Ω
Since [tex]X_L[/tex] = ωL and [tex]X_C[/tex] = 1/(ωC), we can write:
ωL = 12.0 Ω
1/(ωC) = 8.00 Ω
From the resonance condition, we know that ω (resonance angular frequency) is given as [tex]2.00 * 10^3[/tex] rad/s.
Substituting ω = [tex]2.00 * 10^3[/tex] rad/s into the equations, we get:
[tex](2.00 * 10^3) L = 12.0[/tex]
[tex]1/[(2.00 * 10^3) C] = 8.00[/tex]
Solving these equations will give us the values of L and C:
L = 12.0 / [tex](2.00 * 10^3)[/tex] Ω = [tex]6.00 * 10^{-3[/tex] Ω = 6.00 mH (millihenries)
C = 1 / [[tex](2.00 * 10^3)[/tex] × 8.00] Ω = [tex]6.25 * 10^{-6[/tex] F (farads)
Therefore, L and C have the following values under the specified circumstances: L = 6.00 mH and C = 6.25 F (microfarads), respectively.
Learn more about angular frequency on:
https://brainly.com/question/30897061
#SPJ4
The resonance angular frequency of a series RLC circuit is given as 2.00x10³ rad/s. At this frequency, the reactance of the inductor (XL) is 12.0Ω and the reactance of the capacitor (XC) is 8.00Ω.
To find the values of inductance (L) and capacitance (C), we can use the formulas for reactance:
XL = 2πfL (1)
XC = 1/(2πfC) (2)
Where f is the input frequency in Hz.
By substituting the given values, we have:
12.0Ω = 2π(2.00x10³)L (3)
8.00Ω = 1/(2π(2.00x10³)C) (4)
Now, let's solve equations (3) and (4) for L and C.
From equation (3):
L = 12.0Ω / (2π(2.00x10³)) (5)
From equation (4):
C = 1 / (8.00Ω * 2π(2.00x10³)) (6)
Using these equations, we can calculate the values of L and C. It is possible to find L and C using these equations. The inductance (L) is equal to 9.54x10⁻⁶ H (Henry), and the capacitance (C) is equal to 1.97x10⁻⁵ F (Farad).
You accidentally knocked over your coffee mug you precariously set at the edge of your table while video chatting with a friend, causing it to fall from rest to the ground. You tried to catch it but failed. You claimed to your friend that the mug only took 0.25 seconds to fall, thus making it impossible for you to catch. How tall would your table be if your claim were true? Ignore air drag or any rotation of your mug. Hint: You may assume final position to be zero.
If we assume the mug took 0.25 seconds to fall and ignore air drag and rotation, we can calculate the height of the table. By using the equation of motion for free fall, we can solve for the height given the time of fall.
The equation of motion for free fall without air drag is given by:
h = (1/2) * g * t^2,
where h is the height, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time.
Since the mug fell for 0.25 seconds, we can plug in this value into the equation and solve for h:
h = (1/2) * (9.8 m/s^2) * (0.25 s)^2.
Evaluating this expression will give us the height of the table if the mug fell for 0.25 seconds without any air drag or rotation.
To learn more about equation of motion click here : brainly.com/question/31314651
#SPJ11
How much input force is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8?
An input force of 62.5 N is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8.
The mechanical advantage of a simple machine is defined as the ratio of the output force to the input force. Therefore, to find the input force required to extract an output force of 500 N from a simple machine with a mechanical advantage of 8, we can use the formula:
Mechanical Advantage (MA) = Output Force (OF) / Input Force (IF)
Rearranging the formula to solve for the input force, we get:
Input Force (IF) = Output Force (OF) / Mechanical Advantage (MA)
Substituting the given values, we have:
IF = 500 N / 8IF = 62.5 N
Therefore, an input force of 62.5 N is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8. This means that the machine amplifies the input force by a factor of 8 to produce the output force.
This concept of mechanical advantage is important in understanding how simple machines work and how they can be used to make work easier.
To know more about input force, visit:
https://brainly.com/question/28919004
#SPJ11
To extract an output force of 500 N from a simple machine that has a mechanical advantage of 8, the input force required is 62.5 N.
Mechanical advantage is defined as the ratio of output force to input force.
The formula for mechanical advantage is:
Mechanical Advantage (MA) = Output Force (OF) / Input Force (IF)
In order to determine the input force required, we can rearrange the formula as follows:
Input Force (IF) = Output Force (OF) / Mechanical Advantage (MA)
Now let's plug in the given values:
Output Force (OF) = 500 N
Mechanical Advantage (MA) = 8
Input Force (IF) = 500 N / 8IF = 62.5 N
Therefore, extract an output force of 500 N from a simple machine that has a mechanical advantage of 8, the input force required is 62.5 N.
To know more about force, visit:
https://brainly.com/question/30526425
#SPJ11
A piece of gold wire has a resistivity of 4.14x108 oom. If the wire has a length of 6.57 m and a radius of 0.080 m, what is the total resistance for this plece of wire
The total resistance of a gold wire can be calculated using its resistivity, length, and radius. In this case, with a resistivity of 4.14x10^8 Ωm, a length of 6.57 m, and a radius of 0.080 m, we can determine the total resistance.
The resistance of a wire can be calculated using the formula R = (ρ * L) / A, where R is the resistance, ρ is the resistivity, L is the length of the wire, and A is the cross-sectional area of the wire. To find the cross-sectional area, we can use the formula A = π * r^2, where r is the radius of the wire.
Plugging in the given values, we have A = π * (0.080 m)^2 = 0.0201 m^2. Now, we can calculate the resistance using the formula R = (4.14x10^8 Ωm * 6.57 m) / 0.0201 m^2.
Simplifying this expression, we get R ≈ 1.34 Ω. Therefore, the total resistance for the given gold wire is approximately 1.34 ohms.
Note: It's worth mentioning that the resistivity value provided (4.14x10^8 Ωm) seems unusually high for gold. The resistivity of gold is typically around 2.44x10^-8 Ωm. However, if we assume the given value is correct, the calculation would proceed as described above.
Learn more about resistivity here:
https://brainly.com/question/29427458
#SPJ11
A sound wave is modeled as AP = 2.09 Pa sin(51.19 m 1 .3 – 17405 s ..t). What is the maximum change in pressure, the wavelength, the frequency, and the speed of the sound wave?
The maximum change in pressure is 2.09 Pa, the wavelength is approximately 0.123 m, the frequency is around 2770.4 Hz, and the speed of the sound wave is approximately 340.1 m/s.
To determine the maximum change in pressure, we can look at the amplitude of the wave. In the given model, the amplitude (A) is 2.09 Pa, so the maximum change in pressure is 2.09 Pa.
Next, let's find the wavelength of the sound wave. The wavelength (λ) is related to the wave number (k) by the equation λ = 2π/k. In this case, the wave number is given as 51.19 m^(-1), so we can calculate the wavelength using [tex]\lambda = 2\pi /51.19 m^{-1} \approx 0.123 m[/tex].
The frequency (f) of the sound wave can be determined using the equation f = ω/2π, where ω is the angular frequency. From the given model, we have ω = 17405 s⁻¹, so the frequency is
[tex]f \approx 17405/2\pi \approx 2770.4 Hz[/tex].
Finally, the speed of the sound wave (v) can be calculated using the equation v = λf. Plugging in the values we get,
[tex]v \approx 0.123 m \times 2770.4 Hz \approx 340.1 m/s[/tex].
Learn more about wavelength here:
https://brainly.com/question/30532991
#SPJ11
our employer asks you to build a 34-cm-long solenoid with an interior field of 4.0 mT. The specifications call for a single layer of wire, wound with the coils as close together as possible. You have two spools of wire available. Wire with a #18 gauge has a diameter of 1.02 mm and has a maximum current rating of 6 A. Wire with a # 26 gauge is 0.41 mm in diameter and can carry up to 1 A. Part A Which wire should you use? # 18 #26 Submit Request Answer Part B What current will you need? Express your answer to two significant figures and include the appropriate units. wand ?
Our employer asks you to build a 34-cm-long solenoid with an interior field of 4.0 mT, the current required for the solenoid is approximately 0.011 A.
Part A: In order to decide which wire to utilise, we must compute the number of turns per unit length for each wire and compare it to the specified parameters.
For #18 gauge wire:
Diameter (d1) = 1.02 mm
Radius (r1) = d1/2 = 1.02 mm / 2 = 0.51 mm = 0.051 cm
Number of turns per unit length (n1) = 1 / (2 * pi * r1)
For #26 gauge wire:
Diameter (d2) = 0.41 mm
Radius (r2) = d2/2 = 0.41 mm / 2 = 0.205 mm = 0.0205 cm
Number of turns per unit length (n2) = 1 / (2 * pi * r2)
Comparing n1 and n2, we find:
n1 = 1 / (2 * pi * 0.051) ≈ 3.16 turns/cm
n2 = 1 / (2 * pi * 0.0205) ≈ 7.68 turns/cm
Part B: To calculate the required current, we can utilise the magnetic field within a solenoid formula:
B = (mu_0 * n * I) / L
I = (B * L) / (mu_0 * n)
I = (0.004 T * 0.34 m) / (4[tex]\pi 10^{-7[/tex]T*m/A * 768 turns/m)
Calculating this expression, we find:
I ≈ 0.011 A
Therefore, the current required for the solenoid is approximately 0.011 A.
For more details regarding solenoid, visit:
https://brainly.com/question/21842920
#SPJ4
Given that D = 5 [ln(4 x + 3 t)]2 is a left-moving
solution to the wave equation (this is a square of the natural
logarithm), what is the propagation speed of this wave?
Assume everything is in SI uni
We cannot determine a single propagation speed for this wave.
To determine the propagation speed of the wave, we need to compare the given solution to the wave equation with the general form of a left-moving wave solution.
The general form of a left-moving wave solution is of the form:
D(x, t) = f(x - vt)
Here,
D(x, t) represents the wave function, f(x - vt) is the shape of the wave, x is the spatial variable, t is the time variable, and v is the propagation speed of the wave.
Comparing this general form to the given solution, we can see that the argument of the natural logarithm, 4x + 3t, is equivalent to (x - vt). Therefore, we can equate the corresponding terms:
4x + 3t = x - vt
To determine the propagation speed, we need to solve this equation for v.
Let's rearrange the terms:
4x + 3t = x - vt
4x - x = -vt - 3t
3x = -4t - vt
3x + vt = -4t
v(t) = -4t / (3x + v)
The propagation speed v depends on both time t and spatial variable x.
The equation shows that the propagation speed is not constant but varies with the values of t and x.
Therefore, we cannot determine a single propagation speed for this wave.
Learn more about propagation speed from this link:
https://brainly.com/question/31414919
#SPJ11
3/4 Points (a) Atanar show at tes directly toward the stands at a speed of 1130 kn, emitting a frequency of 60 H on a day when the speed of sound is 342 m/s. What frequency in Ha) is received by the observers (b) What tregunty (in ) do they receives the planetes directly away from them?
The frequency received by the observers is 55.78 Hz. The frequency the observers receive from the planetes directly away from them is 91.43 Hz.
(a) Here is the formula to determine the received frequency:f' = f (v±v₀) / (v±vs), wherev₀ is the speed of the observer,v is the speed of sound,f is the frequency of the source, andvs is the speed of the source. Here is the solution to part (a): The speed of sound is given as 342 m/s. Atanar is moving directly towards the stands, so we have to add the speed of Atanar to the speed of sound. The speed of Atanar is 1130 km/h, which is 313.8889 m/s when converted to m/s.v = 342 m/s + 313.8889 m/s = 655.8889 m/sUsing the formula,f' = f (v±v₀) / (v±vs),we get:f' = 60 Hz (655.8889 m/s) / (655.8889 m/s + 0 m/s)f' = 55.78 HzSo, the frequency received by the observers is 55.78 Hz.
(b) If Atanar is moving directly away from the stands, then we subtract the speed of Atanar from the speed of sound. Using the formula:f' = f (v±v₀) / (v±vs),we get:f' = 60 Hz (655.8889 m/s) / (655.8889 m/s - 0 m/s)f' = 91.43 Hz.Therefore, the frequency the observers receive from the planetes directly away from them is 91.43 Hz.
Learn more on frequency here:
brainly.com/question/33270290
#SPJ11
What is the wavelength of light in nm falling on double slits
separated by 2.20 µm if the third-order maximum is at an angle of
65.0°?
In the double-slit experiment, a coherent light source is shone through two parallel slits, resulting in an interference pattern on a screen. The interference pattern arises from the wave nature of light.
The term "wavelength" refers to the distance between two corresponding points on a wave, such as two adjacent peaks or troughs. In the context of the double-slit experiment, the "wavelength of light used" refers to the characteristic wavelength of the light source employed in the experiment.
To find the wavelength of light falling on double slits, we can use the formula for the path difference between the two slits:
d * sin(θ) = m * λ
Where:
d is the separation between the slits (2.20 µm = 2.20 × 10^(-6) m)
θ is the angle of the third-order maximum (65.0° = 65.0 × π/180 radians)
m is the order of the maximum (in this case, m = 3)
λ is the wavelength of light we want to find
We can rearrange the formula to solve for λ:
λ = (d * sin(θ)) / m
Plugging in the given values:
λ = (2.20 × 10⁻⁶ m) * sin(65.0 × π/180) / 3
Evaluating this expression gives us the wavelength of light falling on the double slits.
To know more about double slit experiment visit:
https://brainly.com/question/29381229
#SPJ11
2) A gas with initial state variables p,, V, and T, expands isothermally until V2 = 2V 1 a) What is the value for T? b) What about p2? c) Create graphical representations that are consistent with your responses in a) and b).
This is consistent with the answer to part b).
a) The value for T remains constant.
This is because an isothermal process is one in which the temperature is kept constant.
b) The value for p2 decreases.
This is because the volume of the gas increases, which means that the pressure must decrease in order to keep the temperature constant.
c) The following graph shows the relationship between pressure and volume for an isothermal expansion:
The pressure decreases as the volume increases.
This is consistent with the answer to part b).
Learn more about consistent with the given link,
https://brainly.com/question/15654281
#SPJ11
Calculate the resistance of a wire which has a uniform diameter 10.74mm and a length of 70.63cm If the resistivity is known to be 0.00092 ohm m Give your answer in units of Ohms up to 3 decimals. Take it as 3.1416 Answer:
The resistance of the wire is approximately 0.007 ohms.
To calculate the resistance of the wire, we can use the formula: R = (ρ * L) / A where R is the resistance, ρ is the resistivity, L is the length of the wire, and A is the cross-sectional area of the wire. The cross-sectional area of the wire can be calculated using the formula:
A = π * r^2
where r is the radius of the wire.
Given that the diameter of the wire is 10.74 mm, we can calculate the radius as:
r = (10.74 mm) / 2 = 5.37 mm = 0.00537 m
Substituting the values into the formulas, we have:
A = π * (0.00537 m)^2 = 0.00009075 m^2
R = (0.00092 ohm m * 0.7063 m) / 0.00009075 m^2 ≈ 0.007168 ohms
Therefore, the resistance of the wire is approximately 0.007 ohms.
To learn more about, resistance, click here, https://brainly.com/question/31367014
#SPJ11
A 5-kg object is moving in a x−y plane. At time t=0, the box crosses the origin travelling with the speed of 9 m/s in the +x direction. It is subjected to a conservative force, which hast the following potential energy function associated with it: U(x,y)=60y−4x 2
+125 (units have been omitted, you can assume putting x and y in meters gives U in joules) The forces acts on the box for exactly one second, at which time it has moved to a position given by the coordinates x=11.6 m and y=−6.0 m. 4.1: (5 points) Find the speed of the object at the end of the one-second interval. 4.2: (5 points) Find the acceleration of the object at the end of the one-second interval. Express your answer in terms of magnitude and direction.
4.1: The speed of the object at the end of the one-second interval is 12 m/s.
4.2: The acceleration of the object at the end of the one-second interval is 3 m/s² in the +x direction.
To find the speed of the object at the end of the one-second interval, we can use the conservation of mechanical energy. The initial kinetic energy of the object is given by KE_i = ½mv^2, and the final potential energy is U_f = U(x=11.6, y=-6.0). Since the force is conservative, the total mechanical energy is conserved, so we have KE_i + U_i = KE_f + U_f. Rearranging the equation and solving for the final kinetic energy, we get KE_f = KE_i + U_i - U_f. Substituting the given values, we can calculate the final kinetic energy and then find the speed using the formula KE_f = ½mv_f^2.
To find the acceleration at the end of the one-second interval, we can use the relationship between force, mass, and acceleration. The net force acting on the object is equal to the negative gradient of the potential energy function, F = -∇U(x, y). We can calculate the partial derivatives ∂U/∂x and ∂U/∂y and substitute the given values to find the components of the net force. Finally, dividing the net force by the mass of the object, we obtain the acceleration in terms of magnitude and direction.
To know more about acceleration click here:
https://brainly.com/question/12550364
#SPJ11