Answer:
Density of the ship :133.33 kg/m³
Mass of the ship :50,000,000 kg
Ships are able to float on water because they displace a volume that equals their own weight
Explanation:
The formula for density is ;
Density = Mass/Volume
But the mass of displaced fluid is give by the formula;
m=ρV where ρ is density of the fluid and V is volume of water displaced
Volume of liner= 375000 m³
Volume displaced = 50000 m³
The volume of the water displaced is equal to mass of the liner
I m³ = 1000 kg
50000 m³ = 50000*1000 =50,000,000 kg
50,000,000 kg ----------mass of the ship
So if ;
m= 50,000,000 kg
v= 375000 m³
ρ = m/V
ρ = 50,000,000/375000
ρ = 50,000,000/375000
ρ =133.33 kg/m³
Ships are able to float on water because they displace a volume that equals their own weight. Additionally, the air contained in the spaces of the ship inside is much less dense than density of water aiding in the floating process.
A 3900 kg truck is moving at 6.0 m/s what is the kinetic energy
Answer:
70200J
Explanation:
k.E = 1/2mv^2
K.E = 1/2(3900)(6)^2
what polarity must the red tip of the compass needle be since it points toward the south pole of the magnet?
Answer: positive
Explanation: because opposites attract and north=positive and south=negative the answer should be positive.
The polarity of the red tip of the compass needle must be at the north of the earth, since it points toward the south pole of the magnet.
What is meant by polarity of a magnet ?Polarity of a magnet is defined as the orientation of both the north and south poles of the magnet in space.
Here,
We know that, the opposite poles attract.
The magnetic needle is arranged in a such a way that, the red tip of the magnetic compass needle is actually pointing towards the geographic north pole of the earth.
In order to point the compass needle towards the magnetic south pole, the south pole of the magnet must be located in the geographic north pole.
Hence,
The polarity of the red tip of the compass needle must be at the north of the earth, since it points toward the south pole of the magnet.
To learn more about polarity of magnet, click:
https://brainly.com/question/15329793
#SPJ2
What 2 factors affect the impulse on an object in a collision?
What average net force is required to stop a 1950 kg car in 10.5 s if it’s initially traveling at 28m/s
Answer:
An average net force of 5200 N is needed to stop the car
Explanation:
Cinematics and Dynamics
Cinematics describes the variables involved in the movement without dealing with its causes. There are four main concepts in cinematics: Velocity (or its scalar equivalent, the speed), acceleration, time, and displacement (or the scalar equivalent, distance).
The acceleration can be calculated by:
[tex]\displaystyle a=\frac{v_f-v_o}{t}[/tex]
The initial speed is vo=28 m/s, it stops (vf=0) in t=10.5 seconds, thus the acceleration is:
[tex]\displaystyle a=\frac{0-28}{10.5}[/tex]
[tex]a = -2.67~m/s^2[/tex]
The acceleration is negative because the car loses speed.
Knowing the mass of the car m=1950 Kg, we can calculate the net force required to stop the car by using the formula:
F = m.a =1950*2.67
F = 5200 N
An average net force of 5200 N is needed to stop the car
Will mark brainiest!!!
1. A __ is caused by a sudden shift in the ocean crust which displaces the water. *
2. A tsunamis is possible, but unlikely at a __ plate boundary where two plates are moving sideways past each other. *
3. A Shallow __ is a good indicator of tsunamis, but sends data very slowly and cannot detect earthquakes. *
4. Tsunamis are common at __ plate boundaries, since large earthquakes release the built up pressure, resulting in a quick vertical movement of the plate. *
5. The Indonesian Earthquake of 2004 had a 9.1__, which was the third largest ever recorded in human history. *
All possible answers:
A. Earthquake
B. Tsunami
C. Magnitude
D. Sensor
E. Transform
F. Convergent
G. Divergent
Answer:
1. Tsunami
2.Divergent
3.Sensor
4.Convergent
5.Magnitude
Explanation:
2. (1) A piece of rubber is 50 cm long when a weight of
35 N hangs from it and is 85 cm long when a weight
of 70 N hangs from it. What is the spring constant
of this piece of rubber?
Answer
By F = -kx {-ve just indicating the sign of the force}
=>35 = k x (85-50) x 10^-2
=>k = 100 N/m
Again by F = -kx
A train travels at a speed of 30mph and travelled a distance of 240 miles. How long did it take the train to complete its journey? Must show your work
Answer:
8
Explanation:
240 divided by 30 = 8
What types of energy is used to make a lamp work
Answer:
Electrical energy
Explanation:
I’ll give u BRAINLIEST PLEASE!! HURRY
Answer:
C
Explanation:
Which type of energies make up the mechanical energy of a roller coaster moving along a track?
Answer:
gravitational potential energy and kinetic energy
Explanation:
In its American colonies, Spain helped the Catholic Church meet its goal of
finding gold.
gaining territory.
converting people.
achieving glory.
This is from ed please help thank you
Answer: Converting people
Explanation: In Spanish colonies such as Florida, Spanish moved up into the other states to spread their christianity and were successful with doing so.
A jet aircraft is traveling at 214 m/s in hor-
izontal flight. The engine takes in air at a
rate of 115 kg/s and burns fuel at a rate of
2.53 kg/s. The exhaust gases are ejected at
276 m/s relative to the aircraft.
Find the thrust of the jet engine.
Answer in units of N.
Answer:
The thrust is [tex]F = 7828.3 \ N [/tex]
Explanation:
From the question we are told that
The speed of the jet aircraft is [tex]v = 214 \ m/s[/tex]
The rate at which the engine takes in air is [tex]\^ Q = 115 \ kg/s[/tex]
The rate at which the engine burns fuel is [tex]\r m = 2.53 \ kg/s[/tex]
The speed of the exhaust gases is [tex]u = 276 \ m/s[/tex]
Generally the thrust of the engine is mathematically represented as
[tex]F =[ \^ Q * ( u - v )] + (\r m * u)[/tex]
=> [tex]F =[ 115 * ( 276 - 214 )] + (2.53 * 276)[/tex]
=> [tex]F = 7828.3 \ N [/tex]
What makes the yardstick test a direct measurement of reaction time?
A.
The further the yardstick falls, the slower the reaction time.
B.
Yardsticks have numerical markings for length.
C.
Yardsticks are designed to measure reaction time.
D.
all of the above
Please select the best answer from the choices provided.
A
B
C
D
Answer:
A. the further the yardsticks falls, the slower the reaction time.
Answer:
The further the yardstick falls, the slower the reaction time.
Explanation:
its A
A car traveling at 50 m/s comes to a stop in 5 seconds. What is the
acceleration of this?
Answer:
10
Explanation:
10 is the answer because you divide 50 and 5 and your answer is 10.
Hope this helps:)
Pls mark brainlist
Answer:
a = -10m/s²
Explanation:
Givens:
Vf = 0m/s
Vi = 50m/s
t = 5s
Use the following kinematic equation:
Vf = Vi+at
Rearrange
a = (Vf-Vi)/t
a = -10m/s²
A stretched spring attached to two fixed points is compressed on one end and released, as shown. The resulting wave travels back and forth between the two fixed ends of the spring until it comes to a stop. This is an example of _____ .
a Transverse wave
b
longitudinal wave
c
surface wave
d
electromagnetic wave
Answer:
B. Longitudinal wave
Explanation:
It's the only option that makes sense. Hope this helped :)
Two ice-skaters are skating in circles on a frozen pond. Maria is making large circles with a radius of 12 m and skating 4.5 m/s. Her friend, Samantha, is making smaller circles with a radius of 6 m but is not skating as quickly, going only 3.8 m/s.
How could each skater increase her centripetal acceleration without changing the size of her path? Explain your reasoning.
Answer: Samantha has the largest centripetal acceleration of 2.4 m/s^2. Maria has only 1.69 m/s^2.
Explanation:
What is meant by the components of a vector
The weight of an object is measured in air to be 7.0 N. The
object is then immersed in water and its apparent weight is
measured to be 4.0 N. Determine the buoyant force and state
whether or not the object floats.
Answer:
Buoyant force = 3.0 N
The object will not float.
Explanation:
Apparent weight of a body immersed in water is the actual weight of object minus buoyant force
Given in the question that;
Weight of object in air = 7.0 N
Apparent weight of object = 4.0 N
4.0 N = 7.0 N - Buoyant force
Buoyant force = 7.0 - 4.0 = 3.0 N
In this case, the buoyant force is less than weight of the object thus the object will sink.
What do we call the potential mechanical energy stored in an object when work is performed to change its shape?
A.) elastic energy
B.) sound energy
C.) kinetic energy
When velocity is graphed with respect to time, what does the area under
the line represent?
A) velocity
B) distance
C) acceleration
D) displacement
Answer:
the answer is D
Explanation:
Since the velocity of the object is the derivative of the position graph, the area under the line in the velocity vs. time graph is the displacement of the object.
How much power is used if a force of 35 newtons is used to push a box a distance of 10 meters in 5 seconds?w=350j
Answer:
How much power is used if 350J of work is done when pushing a box for 5 seconds.
Explanation:
the answer is 70watts
Near the surface of Earth, what is the acceleration of an object due to the force of gravity? !!!!! Please answer !!!!!
Answer:
Weight. Recall that the acceleration of a free-falling object near Earth's surface is approximately g=9.80m/s2 g = 9.80 m/s 2 . The force causing this acceleration is called the weight of the object, and from Newton's second law, it has the value mg.
Explanation:
A boy is exerting a force of 70 N at a 50-degree angle on a lawnmower. He is accelerating at 1.8 m/s2. Round the answers to the nearest whole number.
What is the mass of the lawnmower?
What is the normal force exerted on the lawnmower?
The lawnmower accelerates in the positive horizontal direction, so that the net horizontal force is, by Newton's second law,
(70 N) cos(-50°) = m (1.8 m/s²)
where m is the mass of the lawnmower. Solve for m :
m = ((70 N) cos(-50°)) / (1.8 m/s²)
m ≈ 25 kg
The lawnmower presumably doesn't get lifted off the ground, so that the net vertical force is 0. If n is the magnitude of the normal force, then by Newton's second law,
n - m g + (70 N) sin(-50°) = 0
n = m g + (70 N) sin(50°)
n = (25 kg) (9.8 m/s²) + (70 N) sin(50°)
n ≈ 300 N
Which source of energy causes most of the water evaporation on Earth’s surface?
A.
wind
B.
solar
C.
gravity
D.
electrical
Answer:
I think it will be b. solar
Hope I can help.
Answer:
Explanation:
its b
PLEASE HELP ME IM TIMED
examples of uniform motion
Answer:
An airplane cruising at a level height and a steady speed.
A car going along a straight level road at steady speed.
A vibrating spring in a sewing machine.
A ship steaming on a straight course at steady speed.
A train going along the tracks at steady speed.
Explanation:
Hope this helps :)
Answer:
Examples of Uniform Motions.
The hr. ...
An airplane cruising at a level height and a steady speed.
A car going along a straight level road at steady speed.
A vibrating spring in a sewing machine.
A ship steaming on a straight course at steady speed.
A train going along the tracks at steady speed
1. What is power, and what is its relationship to voltage and amperage? (4 points)
power is reffering to force
HELP ASAP FAST PLEASE I NEED HELP
Mechanical energy is defined as
Question 1 options:
the energy of motion and position, which is represented by the formula KE + PE = ME
potential energy
Energy of motion
Energy of machines and tools
Answer:
energy of motion is represented by formula KE+PE=ME
Answer:
formula:
KE+PE=ME
Explanation:
HOPE IT HELPS!
thank me later
a toy car is wound up and released on the floor. it accelerates at a rate of 0.4 m/s/s . the mass of the care is 3kg. what is the force that the cars wheels exert on the floor.
Answer:
1.2N
Explanation:
f=m×a
m=3kg
a=.4m/s/s
3×.4=1.2
kg×m/s/s = N
Can someone help me in this please any one good in science.
Let's calculate the equivalent resistances on both circuits.
On Diagram A we have a series connection of the resistors. The equivalent resistance will be the sum of all resistances:
[tex]R_{eq}=1+1+1\\\\\boxed{R_{eq}=3\Omega}[/tex]
On diagram B we have a parallel connection of the resistors. The reciprocal of the equivalent resistance will be the sum of the reciprocals of all the resistances:
[tex]\frac{1}{R_{eq}} = \frac{1}{1} +\frac{1}{1} +\frac{1}{1} \\\frac{1}{R_{eq}}=3\\\\\boxed{R_{eq}=\frac{1}{3}}[/tex]
Therefore, the larger resistance occurs on diagram A.
For the current, recall
[tex]V=IR[/tex]
Where [tex]I[/tex] stands for current [tex]R[/tex] is the resistance and [tex]V[/tex] is the voltage. Rearranging the equation we have
[tex]I = \frac{V}{R}[/tex]
We can see that the larger the resistance, the smaller the current gets. So the larger current must happen in the diagram with smaller resistance. Therefore, the larger current occurs on diagram B.
Glad to help, wish you great studies ;)
Mark brainliest if you deem the answer worthy