0.60 atm of SO3 and 0.30 atm of SO2are placed in a container and the system is allowed to reach equilibrium. Calculate the pressure of O2(g) at equilibrium.

Answer:

#1: 0.00144 mmolHCl/mg Sample

#2: 0.00155 mmolHCl/mg Sample

#3: 0.00153 mmolHCl/mg Sample

Explanation:

A antiacid (weak base) will react with the HCl thus:

Antiacid + HCl → Water + Salt.

In the titration of antiacid, the strong acid (HCl)  is added in excess, and you're titrating with NaOH moles of HCl that doesn't react.

Moles that react are the difference between mmoles of HCl - mmoles NaOH added (mmoles are Molarity×mL added). Thus:

Trial 1: 0.391M×14.00mL - 0.0962M×34.26mL = 2.178 mmoles HCl

Trial 2: 0.391M×14.00mL - 0.0962M×33.48mL = 2.253 mmoles HCl

Trial 3: 0.391M×14.00mL - 0.0962M×33.84mL = 2.219 mmoles HCl

The mass of tablet in mg in the 3 experiments is 1515mg, 1452mg and 1443mg.

Thus, mmoles HCl /mg OF SAMPLE for each trial is:

#1: 2.178mmol / 1515mg

#2: 2.253mmol / 1452mg

#3: 2.219mmol / 1443mg

Answer:

Thorium-235

Explanation:

Half-life is defined as the time taken for a radioactive material to reduce to half of its original amount. If the original amount of a radioactive substance N is 100%, then;

1st half-life- 50% of N is left

2nd half life - 25% of N is left

3rd half-life- 12.5% of N is left

The half-life of Thorium-235 is 15 billion years, hence three half lives will take place in 45 billion years. Hence 12.5% of the original amount of Thorium-235 present will remain after about 42 billion years.

Answer:

351.1g/mol

Explanation:

you can find the answer using The ideal gas equation

n= PV/RT

n=(1.21*1.9/0.082*301)mol

n=0.092 mol

molar mass=Mass/mole

m=32.3g/0.092mol

m=351.1g/mol

Answer:

THE AMOUNT OF HEAT REQUIRED TO CONVERT ICE FROM -20 C TO STEAM AT 120 C IS 30 946 J OR 30.946 KJ OF HEAT.

Explanation:

Mass = 10 g

To convert 10 g of ice at -20°C to steam at 120°C, the heat involved is:

1. Heat involved in converting the ice from -20 °c to ice at 0 °C:

Heat = mass * specific heat of water solid * change in temperature

heat = 10g * 2.09 J/g°C * ( 0- (-20))

Heat = 10 * 2.09 * 20

heat = 418 J

2. Heat required to convert the ice from 0°C to water at 0°C:

Heat = mass * specific heat of fusion of water solid

Heat = 10 * 333

Heat = 3330 J

3. Heat required to convert water at 0 C to water at 100 C:

Heat = mass * specific heat of water * change in teperature

Heat = 10 * 4.18 * (100 -0)

Heat = 4180 J

4. Heat required to convert water at 100 C to steam at 100 C:

Heat = mass * specific heat of vaporization

Heat = 10 * 2260

Heat = 22600 J

5. Heat required to convert steam from 100 C to steam at 120 C:

Heat = mass * specific heat of water * change in temperature

Heat = 10 * 2.09 * (120 -100)

Heat = 10 * 2.09 * 20

Heat = 418 J

T

he heat required to convert 10 g of ice at -20 C to steam at 120 C is therefore the total of the individual heat of reactions

Total amount of heat = ( 418 J + 3330 J + 4180 J + 22600 J + 418 J)

Total heat =  30946 J

Answer:

A single displacement reaction.

Explanation:

Acid + Metal => Salt + Hydrogen

Since, Acids usually have an H+ ion so the Anion part of the acid combines with the Metal (Which is also a cation). So, Anion part of acid is singly displaced by the Metal.

Answer:

The correct answer is - 0.570 grams

Explanation:

The balanced chemical reaction is given by

Cu(NO3)2(aq)     + 2NaOH(aq)    -------->    Cu(OH)2(s)      + 2NaNO3(aq)

        1.0 mole            2.0 mole                 1.0 mole          2.0 mole

number of mol of Cu(OH)2,

n = Molarity * Volume

= [tex]35.0*0.167 = 5.845[/tex] millimoles

As clear in the equation, 1 mole of Cu(NO3)2 gives 1 mole of Cu(OH)2 , So, 5.845 millimoles of Cu(NO3)2 will produce 5.845 millimoles of Cu(OH)2

Mass of Cu(OH)2 = number of mol * molar mass

= [tex]97.5*5.845*10^-3[/tex]

= 0.570 grams

Thus, the correct answer is - 0.570 grams

Answer:

In the above reaction, sulfur dioxide and oxygen react together to form sulfur trioxide. This means that an increase in pressure would move the equilibrium to the right and result in more sulfur trioxide being formed. Pressure can only affect the position of equilibrium if there is a change in the total gas volume.

Answer:

2OH^-(aq) + Cu^2+(aq) -----> Cu(OH)2(s)

Explanation:

The net ionic equation usually shows the main ionic reaction that goes in the system. The other ions that do not participate in this net ionic equation are called spectator ions. Spectator ions do not participate in the main reaction occurring in the system.

The net ionic equation quite often result in the formation of a solid precipitate in the system such as Cu(OH)2.

The net ionic equation for this reaction is;

2OH^-(aq) + Cu^2+(aq) -----> Cu(OH)2(s)

Answer:

Oxygen present in food items makes then rancid due to the presence of oils and fats. If the food is flushed with nitrogen, it prevents it from being oxidised (the nitrogen acts as an antioxidant).

Hope it helps ! :)

Answer:

second carbon atom from the  end

end carbon atom

Explanation:

Carbohydrates are naturally occurring organic compounds containing carbon, hydrogen and oxygen. The general molecular formula of Carbohydrates is [tex]C_x(H_2O)_y[/tex].

Carbohydrates can be classified based on structures,

Carbohydrates with the structure of alkanals (-CHO) are known as aldose while those of the structure of alkanones (C=O) are known as ketose.

In stereochemistry , D series is a kind of configurational arrangement where the hydroxyl group attaches itself to the right hand side.

Thus; in naturally occurring D series of ketoses, the carbonyl group is found on carbon number second carbon atom from the  end whereas in aldoses, the carbonyl group is found on carbon number end carbon atom.

Hey there!

Mercury (II) chloride has a molar mass of 271.52 g/mol.

So, one mole of mercury (II) chloride has a mass of 271.52 g/mol.

We have 60.5g of mercury (II) chloride.

60.5g ÷ 271.52g/mol = 0.223 mol

There are 0.223 moles in 60.5g of mercury (II) chloride.

Hope this helps!

Answer:

Mercury (II) chloride has a molar mass of 271.52 g/mol.

So, one mole of mercury (II) chloride has a mass of 271.52 g/mol.

We have 60.5g of mercury (II) chloride.

60.5g ÷ 271.52g/mol = 0.223 mol

There are 0.223 moles in 60.5g of mercury (II) chloride.

Hope this helps!

Answer the question NOW Mistystar4881

I hope this was helpful HATERZ like some name above me lol JK about LOL. LOL

Answer:

THE HEAT CAPACITY OF THE CALORIMETER IS 3666.67 J/C

Explanation:

Mass = 2 g

Temperature difference = 32 C - 29 C = 3 C

Heat of combustion = 11 kJ/g

Heat capacity of the calorimeter = unknown

It is important to note that the heat of combustion of the reaction is the heat absorbed by the calorimeter in raising the mixture by 3 C

So therefore,

Heat = heat capacity * temperature difference

Heat capacity = Heat / temperature difference

Heat capacoty = 11 000 J / 3 C

Heat capacity = 3666.67 J/ C

Answer: 0.150 m [tex]Na_2SO_4(aq)[/tex] will have highest boiling point.

Explanation:

Formula used for Elevation in boiling point :

[tex]\Delta T_b=i\times k_b\times m[/tex]

where

[tex]\Delta T_b=T_b-T^o_b[/tex]= elevation in boiling point

[tex[k_b[/tex]  = boiling point constant  

m = molality

i = Van't Hoff factor

A) 0.100 m [tex]NiBr_2[/tex]

i = 3 as [tex]NiBr_2\rightarrrow Ni^{2+}+2Br^-[/tex]

concentration will be [tex]3\times 0.100=0.300[/tex]

B) 0.250 m [tex]CH_3OH[/tex]

i = 1 as [tex]CH_3OH[/tex] is a non electrolyte

concentration will be [tex]1\times 0.250=0.250[/tex]

C) 0.100 molal [tex]MgSO_4(aq)[/tex]

i = 2 as [tex]MgSO_4\rightarrrow Mg^{2+}+SO_4^{2-}[/tex]

concentration will be [tex]2\times 0.100=0.200[/tex]

D. 0.150 molal [tex]Na_2SO_4(aq)[/tex]

i = 3 as [tex]Na_2SO_4\rightarrrow 2Na^{+}+SO_4^{2-}[/tex]

concentration will be [tex]3\times 0.150=0.450[/tex]

E. 0.150 molal [tex]NH_4NO_3(aq)[/tex]

i = 2 as [tex]NH_4NO_3\rightarrrow NH_4^{+}+NO_3^{-}[/tex]

concentration will be [tex]2\times 0.150=0.300[/tex]

The solution having the highest concentration of ions will have the highest boiling point and thus 0.150 m [tex]Na_2SO_4(aq)[/tex] will have highest boiling point.

The aqueous solution that would have the highest temperature at boiling point would be:

D). 0.150 molal Na2SO4(aq)

The boiling point is described as the temperature at which the solution starts boiling or the vapor pressure becomes equivalent to the provided external/outer pressure.

To determine the elevation in boiling point, we will use:

Δ[tex]T_{b}[/tex] [tex]= i[/tex] × [tex]k_{b}[/tex] × [tex]m[/tex]

with

[tex]T_{b}[/tex] [tex]= T_{b} - T^{0}_{b}[/tex]

[tex]k_b[/tex] [tex]=[/tex] constant of boiling point

Using this formula,

0.150 molal Na2SO4(aq)

Given,

[tex]i = 3[/tex]

[tex]Na2So4[/tex] will have

[tex]2Na^{+}[/tex] [tex]+[/tex] [tex]SO^{2-}_{4}[/tex]

So,

Concentration [tex]= 3[/tex] × [tex]0.15[/tex][tex]0[/tex]

[tex]= 0.45[/tex][tex]0[/tex]

∵ 0.150 molal [tex]Na2SO4[/tex]Na2SO4(aq) has the maximum concentration.

Thus, option D is the correct answer.

Learn more about "Aqueous solution" here:

brainly.com/question/14097392

Answer:

c. 0.34 M hydrocyanic acid + 0.27 M sodium cyanide .

Explanation:

A buffer is defined as the aqueous mixture of a weak acid with its conjugate base or vice versa. Based on the systems:

a. 0.12 M calcium hydroxide + 0.29 M calcium bromide. IS NOT A GOOD BUFFER SYSTEM because Ca(OH)₂ is a strong base.

b. 0.25 M perchloric acid + 0.16 M sodium perchlorate. IS NOT A GOOD BUFFER SYSTEM because perchloric acid is a strong acid

c. 0.34 M hydrocyanic acid + 0.27 M sodium cyanide. IS A GOOD BUFFER SYSTEM because HCN is a weak acid, and its conjugate base, CN⁻, is obtained in the dissolution of NaCN as Na⁺ and CN⁻ ions.

Answer:

See explanation

Explanation:

When we have to write an organic molecule, we have to remember the IUPAC rules. In this case, we have: "2,5-dimethylfuran". We can divide the name into two parts:

a) "2,5-dimethyl"

b) "Furan"

For part a) we have the indications of the "subgroups" bonded to the main structure, in this case, we have 2 methyl groups ([tex]CH_3[/tex]) bonded to carbons 2 and 5.

For part b) we have the main, structure. In this case furan, this compound is a cyclic structure of 5 members in which we have in the middle of the molecule an oxygen atom and  2 double bonds (see figure 1).

Finally, when we add the methyl groups to the furan we will get the 2,5-dimethylfuran. (see figure 2).

I hope it helps!

Answer:

The net ionic equation is as follows:

HCN(aq) + OH-(aq) ----> H20(l) + CN-(aq)

Explanation:

The reaction between Hydrocyanic acid, HCN, and sodium hydroxide is a neutralization reaction between a weak acid and a strong base.

Hydrocyanic acid being a weak acid ionizes only slightly, while sodium hydroxide being a strong base ionizes completely. The equation for the reaction is given below:

A. HCN(aq) + NaOH-(aq) ----> NaCN(aq) + H2O(l)

Since Hydrocyanic acid is written in the aqueous form as it ionizes only slightly and the ionic equation is given below:

HCN(aq) + Na+(aq)+OH-(aq) ----> Na+(aq)+CN-(aq) + H2O(l)

Na+ being a spectator ion is removed from the net ionic equation given below:

HCN(aq) + OH-(aq) ----> H20(l) + CN-(aq)

Answer:

4.16M/s

Explanation:

Based on the reaction:

CH₄ + N₂Cl₄ ⇄ CCl₄ + N₂ + 2H₂

1 mole of methane, CH₄, produce 2 moles of H₂.

That means whereas 1 mole of methane is consumed, 2 moles of H₂ are formed

Having this in mind, if you are consuming methane at a rate of 2.08M/s, the rate of formation of hydrogen must be twice this rate, because there are produced twice moles of H₂.

Thus, rate of formation of H₂ is:

2.08M/s ₓ 2 =

4.16M/s

The rate of formation of H2 is 4.16M/s

Based on the reaction:

CH₄ + N₂Cl₄ ⇄ CCl₄ + N₂ + 2H₂

here

1 mole of methane, CH₄, produce 2 moles of H₂.

In the case when you are consuming methane at a rate of 2.08M/s, the rate of formation of hydrogen must be twice this rate, because there are produced twice moles of H₂.

Thus, rate of formation of H₂ is:

2.08M/s ( 2) = 4.16M/s

Learn more: https://brainly.com/question/26115859?referrer=searchResults

Answer:

9.375

Explanation:

According to the chemical equation, for every 4 moles of gallium, 3 moles of sodium are needed to react.  Set up a ratio using this relationship to solve.

4/3 = 12.5/x

4x = 37.5

x = 9.375

You need 9.375 moles of sulfur.

Answer:

c

Explanation:

Both atoms and charge needs to be considered in balancing redox reactions. Hence, Option (C) is the correct answer.

A chemical reaction that takes place between an oxidizing substance and a reducing substance.

The oxidizing substance loses electrons in the reaction, and the reducing substance gains electrons.

Therefore , Both atoms and charge needs to be considered in balancing redox reactions. Hence, Option (C) is the correct answer.

Learn more about redox reaction here ;

https://brainly.com/question/13293425

#SPJ2

Answer:

D) [PCl5]=0.00765M,[PCl3]=0.117M,and [Cl2]=0.0.117M

Explanation:

Based on the reaction:

PCl₅(g) ⇄ PCl₃(g) + Cl₂(g)

And knowing:

Kc = [PCl₃] [Cl₂] / [PCl₅] = 1.80

When you add PCl₅ into a flask, this gas will react producing PCl₃ and Cl₂ until [PCl₃] [Cl₂] / [PCl₅] = 1.80

This could be written as:

[PCl₃] = X

[Cl₂] = X

[PCl₅] = 0.125M - X

Where X represents the moles of PCl₅ that react, reaction coordinate.

Replacing in Kc expression:

[PCl₃] [Cl₂] / [PCl₅] = 1.80

[X [X] / [0.125 - X] = 1.80

X² = 0.225 - 1.80X

0 = -X² -1.80X + 0.225

Solving for X:

X = -1.9M → False solution, there is no negative concentrations

X = 0.11735M → Right solution.

Replacing, concentrations in equilibrium are:

[PCl₃] = X

[Cl₂] = X

[PCl₅] = 0.125M - X

[PCl₃] = 0.117M

[Cl₂] = 0.117M

[PCl₅] = 0.00765M

And right option is:

Answer:

[tex]m_{CO_2}=46.6gCO_2[/tex]

Explanation:

Hello,

In this case, considering the combustion of propane:

[tex]C_3H_8(g)+5O_2(g)\rightarrow 3CO_2(g)+4H_2O(g)\ \ \ \Delta _CH=-2220.0 kJ/mol[/tex]

We can compute the burnt moles of propane as shown below:

[tex]n=\frac{-784kJ}{-2220.0 kJ/mol} =0.353molC_3H_8[/tex]

Then, by noticing propane and carbon dioxide are in a 1:3 molar ratio, we can compute the grams carbon dioxide by using the shown below stoichiometric procedure:

[tex]m_{CO_2}=0.353molC_3H_8*\frac{3molCO_2}{1molC_3H_8} *\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=46.6gCO_2[/tex]

Best regards.

Answer:

Partial pressure of hydrogen H₂ = 0.32 atm

Explanation:

Given:

Total pressure = 0.48 atm

Find:

Partial pressure of hydrogen

Computation:

Number of mole of H₂ = 1 / 2 = 0.5 moles

Number of mole of He  = 1 / 4 = 0.25 moles

Total moles = 0.5 + 0.25 = 0.75

Partial pressure of hydrogen H₂ = [moles / total moles] Total pressure

Partial pressure of hydrogen H₂ = [0.50 / 0.75]0.48 atm

Partial pressure of hydrogen H₂ = 0.32 atm

Answer: 0.32 atm

Explanation:

First convert the mass of H2 to moles using the molar mass.

(1.0 gram H2 ⋅ (1.0 mol H2 / 2.016 g H2)) ≈ 0.50 mol H2

Next, convert the mass of helium He to moles using the atomic mass.

(1.0 gram He ⋅ (1.0 mol He / 4.003 g He)) ≈ 0.25mol He

The total number of moles is about 0.75 moles . The partial pressure of a component of a gas mixture can be found by multiplying the mole fraction by the total pressure.

PH2 = XH2 × Ptotal

PH2 = (0.50 mol / 0.75 mol)(0.48 atm) = 0.32 atm

Answer:

A)566×10^-16J

B)711.99×10^-16J

C)688.69×10^-12J

Explanation:

A)

But we know that

1 nm = 10^-9 m

Then we can Convert from nanometer to metre which is SI unit

632.8 nm = 632.8×10^-9 m = 6.328×10^-7 m

The speed of light is c = 2.998×10^8 m/s

λ = 6.328×10^-7 m

But the frequency can be calculated as;

ƒ = c / λ

ƒ = (2.998×10^8 m/s) / (6.328×10^-7 m)

Then

ƒ = 4.738×10^14 s-1

To calculate Energy we use

Energy= hf

Where h is plank constant= 6.626× 10^-34

Energy= 6.626× 10^-34 × 4.738×10^14=566×10^-16J

B)

But we know that

1 nm = 10^-9 m

Then we can Convert from nanometer to metre which is SI unit

Then 503 nm = 503×10^-9 m = 5.03×10^-7 m

c = 2.998×10^8 m/s

λ = 5.03×10^-7 m

But the frequency can be calculated as;

ƒ = c / λ

ƒ = (2.998×10^8 m/s) / (5.03×10^-7 m)

ƒ = 5.960×10^14 s-1

Energy= 6.626× 10^-34 × 5.960×10^14 s-1= 711.99×10^-16J

C)

1 nm = 10^-9 m

0.0520 nm = 0.0520×10^-9 m = 5.20×10^-11 m

Where the speed of light is

c = 2.998×10^8 m/s

λ = 5.20×10^-11 m

But the frequency can be calculated as;

ƒ = c / λ

ƒ = (2.998×10^8 m/s) / (5.20×10^-11 m)

ƒ = 5.765×10^18 s-1

Energy= 6.626× 10^-34 × 5.765×10^18 s-1= 688.69×10^-12J

Answer:

The substance with the highest heat gives heat to the lowest temperature, equating both temperatures,

In this situation there is talk of giving up heat but not matter, it is here that the law of conservation of energy comes into play.

Explanation:

The law of conservation of energy talks about that energy is transformed and never lost between two substances or two bodies that interact with each other, these interactions can be heat exchanges, as in this example.

ΔGrxn = 958 kJ

(answer on Edge)

To solve such this we must know the concept of redox reaction. Redox reaction is the one in which oxidation and reduction takes place simultaneously. The classification for the given reaction is redox reaction.

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.

The balanced equation is

4NH[tex]_3[/tex](g) + 50[tex]_2[/tex](g) – 4NO(g) + 6H[tex]_2[/tex]0(9)

In the given reaction, Nitrogen in NH[tex]_3[/tex] is getting reduced, Oxygen in 0[tex]_2[/tex] is getting oxidized.

Therefore, the classification for the given reaction is redox reaction.

Learn more about the chemical reactions, here:

https://brainly.com/question/3461108

#SPJ2

Answer:

The unknown compound is a weak acid.

Explanation:

Given that :

a 25 mL sample of a solution of an unknown compound is titrated with a 0.115 M NaOH solution.

A buffer region was found around a pH of 3.5. We know that a pH of 3.5 is a weak acid. So, it is likely to be an organic acid

Let assume the solution of the unknown sample to be CH₃COOH

Now :

25 mL of CH₃COOH reacted with 0.115 M of NaOH

The equation for the reaction will be :

CH₃COOH    +    NaOH -----> CH₃COONa + H₂O

at x mole of      0.115y M of

CH₃COOH       NaOH is present

If NaOH was added in excess;

CH₃COOH    +    NaOH -----> CH₃COONa , NaOH will be lost then CH₃COOH    and CH₃COONa will be present

Therefore;

At equilibrium : Only CH₃COONa will be present but if it is above equilibrium NaOH will be present   because the pH will increase due to the presence of the strong base

Answer:

HCl(aq) + KOH(aq) ⇒ KCl(aq) + H₂O(l)

Explanation:

Hydrochloric acid is an acid because it releases H⁺ in an aqueous solution.

Potassium hydroxide is a base because it releases OH⁻ in an aqueous solution.

When an acid reacts with a base they form a salt and water. This is a neutralization reaction. The neutralization reaction between hydrochloric acid and potassium hydroxide is:

HCl(aq) + KOH(aq) ⇒ KCl(aq) + H₂O(l)

Answer:

CH4

Explanation:

In solving this problem, we must remember that one mole of a compound contains Avogadro's number of elementary entities. These elementary entities include atoms, molecules, ions etc. Recall that one mole of a substance is the amount of substance that contains the same number of elementary entities as 12g of carbon-12. The Avogadro's number is 6.02 × 10^23.

Hence we can now say;

If 163 g of the compound contains 6.13 ×10^24 molecules

x g will contain 6.02 × 10^23 molecules

x= 163 × 6.02 × 10^23 / 6.13 × 10^24

x= 981.26 × 10^23/ 6.13 ×10^24

x= 160.1 × 10^-1 g

x= 16.01 g

x= 16 g(approximately)

16 g is the molecular mass of methane hence x must be methane (CH4)

Answer:

Explanation:

D